Where can I find this ?

[pearljam724]

Does anyone sell those rubber flap covers that’s on the driver side front wheel well ? You know the one you remove to have access to the upper control arm cam bolts when aligning your car ? Mines has a slight tear in it from age and someone tugging on it to remove it. Anyone sell them new ?

 

[cbodybob]

Does anyone sell those rubber flap covers that’s on the driver side front wheel well ? You know the one you remove to have access to the upper control arm cam bolts when aligning your car ? Mines has a slight tear in it from age and someone tugging on it to remove it. Anyone sell them new ?

Check with Detroit Muscle Technologies

 

[Kern Dog]

You can make your own. Check with Home Depot in the roofing department.

 

[pearljam724]

You can make your own. Check with Home Depot in the roofing department.

If you’re suggesting a roll of rubber roofing. That roll is probably a 2-3 hundred dollars ?

 

[69bfan]

A large number of vendors stock them. The frame rail seals are all the same for the 66 to 70 B-Body applications. It is masticated rubber. I believe that most all of the vendors provide them with the correct style clips for around $18.00 plus the shipping.

 

[dadsbee]

Detroit Muscle Technologies.. or as Greg points out a piece of 1/8" rubber and cut your own. I have such roll, still bought it done and ready to go to get the new stainless clips.

 

[pearljam724]

A large number of vendors stock them. The frame rail seals are all the same for the 66 to 70 B-Body applications. It is masticated rubber. I believe that most all of the vendors provide them with the correct style clips for around $18.00 plus the shipping.

Oh, thank you. That’s very reasonable.

 

[pearljam724]

Detroit Muscle Technologies.. or as Greg points out a piece of 1/8" rubber and cut your own. I have such roll, still bought it done and ready to go to get the new stainless clips.
View attachment 938488 View attachment 938489

Thank you. I might resort to buying an aftermarket one. Mine is not that bad. Just the upper right hand corner clip hole is torn. I asked for help, because this is one aftermarket item I never came across. Without looking myself. Is that surface extremely flat extending to all clip points ? So a piece of sheet aluminum could possibly be used if I decided ?