1967 Dodge rear quarter panels

[Bold & Old]

I decided to go with Joe Phillips's new left rear fender (1). Had a nice chat... with the craftsman.

He makes them one at a time as they are ordered (about 2 weeks).

I was in the right place at the right time....

B Bodies 1966-7 Satellites and Coronets we have a good source now.

My right side will not need the drastic repair.

 

[440 4 speed]

Made a mistake, wrote Joe Smith, NOT!!! Should have posted Joe Phillips, for quarters.

 

[rich hourigan]

I hate to be rude and ask but its killing me...heheheh.... what does he charge to make a quarter panel?......

 

[Bold & Old]

I really would like that to be between you and him since he did not answer that question when he was asked.
Personally it was worth it..... this panel is dead on.

email him and i know he will tell you.... sorry for the skirting and the subject.

joephillipsrestoration@gmail.com.

Thank you for your understanding....

 

[Durandal25]

So I have the same issue....I went with getting a few lower quarter patched from Sherman and, yes they do need a lot of prep before then can be welded up....but the fit is pretty good. Trunk extensions as well....but its better then having the source a donor car and with a bit of dolly work....they go right in there....metal thickness is fine as well.....not too sure why folks make that comparison. AMD is a better panel for sure....but I called them about future products and the guy I sopke to could have cared less out finding out.....so.....

 

[Bold & Old]

So I have the same issue....I went with getting a few lower quarter patched from Sherman and, yes they do need a lot of prep before then can be welded up....but the fit is pretty good. Trunk extensions as well....but its better then having the source a donor car and with a bit of dolly work....they go right in there....metal thickness is fine as well.....not too sure why folks make that comparison. AMD is a better panel for sure....but I called them about future products and the guy I sopke to could have cared less out finding out.....so.....

I found that most of the auto part suppliers are just money makers that do not have a clue.... they do not know what they are selling according to a sales lady... i was told to look at the internet pictures to make a valuation. This is the way it is today.

 

[Bold & Old]

I checked with Joe and he did not mine sharing the costs of each panel.

The price is $1200 per side + shipping costs (around $100 in my case). I consider this very fair.

He is working on my Left side panel now and sent me a picture today of it in progress.

The wheel well arch area to be finished in the next day or two.

He told me that it takes about two weeks from start to finish.

Thanks to the Canadian craftsman

 

[YY1]

That is definitely art.

 

[Bold & Old]

update today