• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Charger drivers side mirror questions

Daytona Jim

FBBO Gold Member
FBBO Gold Member
Local time
1:10 PM
Joined
Jun 26, 2015
Messages
161
Reaction score
148
Location
Napa California
Is a remote driver's side mirror a different style from a non-remote mirror?
Is there a lump in the sheet metal around the stud hole, next to the control cable hole, or should it be flat?
I'm doing a '69 Charger that did not come with a remote mirror, thanks' Jim
 
I'll look at my car tomorrow morning.
Nice Avatar photo! Is that your car?
 
Is a remote driver's side mirror a different style from a non-remote mirror?

Yes, but they do go in the same holes.


Is there a lump in the sheet metal around the stud hole, next to the control cable hole, or should it be flat?
I'm doing a '69 Charger that did not come with a remote mirror, thanks' Jim

The factory always overtightened the 1/4" nut which caused the door skin to develop that lump. You're better off leaving it like that rather than bang the sheetmetal down and filling it.
 
The sheet metal car doesn't have a hole yet so sorry, couldn't tell. Looks like RC has it covered!
 
I'll look at my car tomorrow morning.
Nice Avatar photo! Is that your car?
Sorry for the late response, internet issues. Yes that is my car. The picture was taken in 1992 on Virginia Street in Reno NV. at the "Hot August Nights" carshow.
 
Sorry for the late response, internet issues. Yes that is my car. The picture was taken in 1992 on Virginia Street in Reno NV. at the "Hot August Nights" carshow.


THAT is a REALLY cool shot! Can I pay you for a copy? I'd love to make a print!
 
Auto Transport Service
Back
Top