• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

440+6 with Vintage Air Question

HeliPilot71

Well-Known Member
Local time
10:41 AM
Joined
Jan 23, 2015
Messages
171
Reaction score
19
Location
Edmond,OK
I am looking for a bracket for my vintage air compressor that will allow it to be used with the 440+6. As some of you may know, installing the bracket that came with the system is too high once mounted and interferes with the +6 air cleaner. I know they have to be out there. Any help or remedies would be greatly appreciated.

Thanks a lot for any information.

Eric
 
What compressor are you using?
 
I used this system from Billet Connection:
Mike
IMG_2562.JPG
 
I am looking for a bracket for my vintage air compressor that will allow it to be used with the 440+6. As some of you may know, installing the bracket that came with the system is too high once mounted and interferes with the +6 air cleaner. I know they have to be out there. Any help or remedies would be greatly appreciated.

Thanks a lot for any information.

Eric
was wondering were the compressor sits,I would love to add AC to my 6 pack setup. I thought all the compressors sit up top.
 
was wondering were the compressor sits,I would love to add AC to my 6 pack setup. I thought all the compressors sit up top.
That's the issue I am facing...its too high and hits the air cleaner...It's been done; looking for insight on what bracket was used.
 
Auto Transport Service
Back
Top