Scarebird (uscartool.com) B Body Part Numbers

[Kern Dog]

The earlier calipers needed some material shaving off.... but I think that has been taken care of now.

Scarebird changed ownership a few years ago....hopefully they are now more receptive to inquiries.

I read that they shut down but if they did merge or get bought out, that is better news. Thanks!

 

[bobfake]

The bracket would be different, locating the caliper inboard 1/2" for the smaller rotors. I used 73 dart stuff on my 66 coronet and 78 aspen stuff on my 66 belvedere. I looked at the scarebird stuff, but went the stock route out of pure laziness.

Thanks Nxcoupe…that makes sense to me now. I assumed one set of brackets for B body since they only list one and same when I talked to the rep at Carlisle. So the kit they have now versus before now use 11.75” Cordoba rotors…

Kit is ordered, so parts acquisition begins!!

 

[bobfake]

I read that they shut down but if they did merge or get bought out, that is better news. Thanks!

Scarebird was bought by US Car Tool

 

[bobfake]

One last thing…what proportioning valve if any did you use?