70 Rocker Moulding Clips Ford?

[1 Wild R/T]

In the past Auveco was the company that made a variety of those clips, from .5" wide to 4" wide, some snap in the holes from around 1/4" to around 1/2" others have a stud that accepts a nut if you have access to the back of the panel... I've used a bunch of them, they may not look OE but once install you can't see them & they work great...

 

[Moparfiend]

In the past Auveco was the company that made a variety of those clips, from .5" wide to 4" wide, some snap in the holes from around 1/4" to around 1/2" others have a stud that accepts a nut if you have access to the back of the panel... I've used a bunch of them, they may not look OE but once install you can't see them & they work great...

Thank you. There isn’t any access to the back so it’s a blind mate snap fit.

 

[1 Wild R/T]

Thank you. There isn’t any access to the back so it’s a blind mate snap fit.

Yeah, I knew that was the case in this application.... But these clips are useful for all sorts of trim... You need to know the diameter of the hole the clip will be snapped into & the width of the trim...

With that info I would probably use this contact form....

https://www.auveco.com/contact-us

 

[Moparfiend]

I am out of Argon gas.. I mocked up a clip and will try to weld it tomorrow if I get the gas.