Diagnosis MOPAR Charging System

[Auggie56]

 

[71Beeper]

Dead Dodge garage Jamie knows his stuff!

 

[72RoadrunnerGTX]

Dead Dodge garage Jamie knows his stuff!

Can't agree with that statement, he doesn’t seem understand the severe danger of the “shunt wire bypass” he promotes all the time, including in the linked video here. I would strongly recommend you heed his warnings at the beginning of his electrical videos that he “is not a trained expert in the field of automotive electrical”. Full unaltered circuit protection does matter. Sure doesn’t like to be questioned about some of the mis-information he presents as fact.
There are much better sources of information about this charging/load distribution system available out there, some from actual trained experts with way more experience.

 

[RJRENTON]

Can't agree with that statement, he doesn’t seem understand the severe danger of the “shunt wire bypass” he promotes all the time, including in the linked video here. I would strongly recommend you heed his warnings at the beginning of his electrical videos that he “is not a trained expect in the field of automotive electrical”. Full unaltered circuit protection does matter. Sure doesn’t like to be questioned about the info he presents as fact.
There are much better sources of information about this charging/load distribution system available out there, some from actual trained experts with way more experience.

72RoadrunnerGTX.....
There are just too many self appointed "experts", such as Dead Dodge Garage, trying to explain how the Mopar charging system works and the several orders of magnitude the number of people that believe in what's being proclaimed as gospel. The best thing for these people to do is read and reread your exceptionally good detailed explanations of how the system operates.......and IGNORE the rubbish presented by the Dead Dodge Garage expose. You should copyright your work to prevent others from plagiarising your work and claiming it as their work......specifically some Spanish person that knows nothing but pretends he does as his own work....
BOB RENTON

 

[dadsbee]

F off with the Spanish digs Bob. Maybe learn the language and some etiquette.

 

[OneWheelPeel]

F off with the Spanish digs Bob. Maybe learn the language and some etiquette.

I would like to second that.

 

[RJRENTON]

I would like to second that.

Why???? perhaps it's because YOU don't understand how the system works either. Wirh regard to the UNNAMED person eluded to, perhaps, he would benefit the most for a complete understanding of how things function rather than the disconnected inaccurate ramblings normally presented.....
BOB RENTON

 

[OneWheelPeel]

Why???? perhaps it's because YOU don't understand how the system works either. Wirh regard to the UNNAMED person eluded to, perhaps, he would benefit the most for a complete understanding of how things function rather than the disconnected inaccurate ramblings normally presented.....
BOB RENTON

Why? Simply because your pissy attitude and attacks on the guy do nothing to improve your credibility. Assuming I agree with the sentiment that you should show some etiquette is because I have a lack of understanding about the electrical system misses the point, it has nothing to do with that. If that is not a knee jerk response and you really believe that its another ding against credibility, or basic sanity.

And to be clear I never claimed to have the proper understanding, I'm smarter than the average bear when it comes to things electrical and part of that is knowing I have much to learn.

Don't look at the guy in the other lane, run your own race. If your way is right it will rise to the top.
YOU have posts that show you have knowledge, I think some of them I've even benefited from, but there is the thing of considering the source, and when the source seems to have a constant bad attitude it doesn't help get your word out there.

 

[Jeff Peterson]

 

[RJRENTON]

Why? Simply because your pissy attitude and attacks on the guy do nothing to improve your credibility. Assuming I agree with the sentiment that you should show some etiquette is because I have a lack of understanding about the electrical system misses the point, it has nothing to do with that. If that is not a knee jerk response and you really believe that its another ding against credibility, or basic sanity.

And to be clear I never claimed to have the proper understanding, I'm smarter than the average bear when it comes to things electrical and part of that is knowing I have much to learn.

Don't look at the guy in the other lane, run your own race. If your way is right it will rise to the top.
YOU have posts that show you have knowledge, I think some of them I've even benefited from, but there is the thing of considering the source, and when the source seems to have a constant bad attitude it doesn't help get your word out there.

It's a little difficult to comprehend that a high percentage of people that subscribe to this forum, put so much credibility to this person's (who shall remain nameless at this point in time) total lack of fundamental knowledge of how the Mopar charging system operates.....why?? My attitude has nothing to do with the subject.....but my Professional Engineering Cedential (Ethics) I'm just trying to discern the correct methodology not incorrect information....apparently you can profess your opinion of me and the subject and who said what, but I cannot......why is this?? Perhaps you do not understand the Ethics credential and need it explained.......without the use of vulgarities......
BOB RENTON

 

[RJRENTON]

View attachment 1894002

THANK YOU......looks like I need a hair cut......
BOB RENTON

 

[OneWheelPeel]

It's a little difficult to comprehend that a high percentage of people that subscribe to this forum, put so much credibility to this person's (who shall remain nameless at this point in time) total lack of fundamental knowledge of how the Mopar charging system operates.....why?? My attitude has nothing to do with the subject.....but my Professional Engineering Cedential (Ethics) I'm just trying to discern the correct methodology not incorrect information....apparently you can profess your opinion of me and the subject and who said what, but I cannot......why is this?? Perhaps you do not understand the Ethics credential and need it explained.......without the use of vulgarities......
BOB RENTON

Its a little difficult to comprehend that dadsbee tells you to stop and you want to go after the guy who agrees with him, instead of going after him.
Your attitude does have something to do with it when you are discussing the subject with people. If the guy's info is wrong then fine, how it chaffs your hide so badly is the bigger mystery. The wrongness itself will eventually sort out without constant chiming in like a broken record.
Now about voicing opinions: So the big difference is I will give you my opinion, and then drop it. I won't do it again and again and be a pain in the butt. I only have written this much to try and give a thoughtful response to your question. You have my opinion for better or worse, if I turn into a broken record then of course people can say "Shaddup OWP, we already heard you"
I think I have been clear enough on my opinion, if one of the more reasonable members of the forum feels I should elucidate I will, otherwise I'm done with it. Admins don't need the annoyance of this continuing.

 

[Canadian1968]

Why???? perhaps it's because YOU don't understand how the system works either. Wirh regard to the UNNAMED person eluded to, perhaps, he would benefit the most for a complete understanding of how things function rather than the disconnected inaccurate ramblings normally presented.....
BOB RENTON

Sad , very sad.

"Disconnected inaccurate ramblings "

it's amazing how often you describe your own actions.

Same old respones, same ramblings, it's hard to watch people deteriorate.

Here let me help you with your next response " maybe it's because YOU just don't understand "

 

[RJRENTON]

Its a little difficult to comprehend that dadsbee tells you to stop and you want to go after the guy who agrees with him, instead of going after him.
Your attitude does have something to do with it when you are discussing the subject with people. If the guy's info is wrong then fine, how it chaffs your hide so badly is the bigger mystery. The wrongness itself will eventually sort out without constant chiming in like a broken record.
Now about voicing opinions: So the big difference is I will give you my opinion, and then drop it. I won't do it again and again and be a pain in the butt. I only have written this much to try and give a thoughtful response to your question. You have my opinion for better or worse, if I turn into a broken record then of course people can say "Shaddup OWP, we already heard you"
I think I have been clear enough on my opinion, if one of the more reasonable members of the forum feels I should elucidate I will, otherwise I'm done with it. Admins don't need the annoyance of this continuing.

I really do not care what dadsbee thinks, does or says about my postings. Who appointed him as the majority spokes person for my postings or disputes my reasonong for my comments. The same holds true your comments as well.
Since you obviously do not understand the how's and why's of Engineering Ethics, when applied to the Professional Engineering credentials, Ethics try to correct incorrect assumptions related in any given subject, in this case, the Mopar Charging system and it's operation. Yet, incorrect information still abounds, perhaps, because the posting of the incorrect information is not understood by the person making the comment. Continually posting incorrect does not make it correct. A fundamental knowledge of the issue is required. Perhaps, ]the poster should relearn the fundamentals. My opinion is just as valuable as yours, and I will express my thoughts in spite of your objections.
BOB RENTON

 

[toolmanmike]

I really do not care what dadsbee thinks, does or says about my postings. Who appointed him as the majority spokes person for my postings or disputes my reasonong for my comments. The same holds true your comments as well.
Since you obviously do not understand the how's and why's of Engineering Ethics, when applied to the Professional Engineering credentials, Ethics try to correct incorrect assumptions related in any given subject, in this case, the Mopar Charging system and it's operation. Yet, incorrect information still abounds, perhaps, because the posting of the incorrect information is not understood by the person making the comment. Continually posting incorrect does not make it correct. A fundamental knowledge of the issue is required. Perhaps, ]the poster should relearn the fundamentals. My opinion is just as valuable as yours, and I will express my thoughts in spite of your objections.
BOB RENTON

Hey Bob, I didn't see the word "ethics" used but I did see "etiquette" used after you made mention of
"specifically some Spanish person that knows nothing but pretends he does as his own work".
Now, you have said your piece, so scroll on and leave this thread alone. Entender?

 

[WileE]

 

[WileE]

> " C'mon, Bob... get up an' hit 'em hard... just my opinion, of course."

 

[OneWheelPeel]

I really do not care what dadsbee thinks, does or says about my postings. Who appointed him as the majority spokes person for my postings or disputes my reasonong for my comments. The same holds true your comments as well.
Since you obviously do not understand the how's and why's of Engineering Ethics, when applied to the Professional Engineering credentials, Ethics try to correct incorrect assumptions related in any given subject, in this case, the Mopar Charging system and it's operation. Yet, incorrect information still abounds, perhaps, because the posting of the incorrect information is not understood by the person making the comment. Continually posting incorrect does not make it correct. A fundamental knowledge of the issue is required. Perhaps, ]the poster should relearn the fundamentals. My opinion is just as valuable as yours, and I will express my thoughts in spite of your objections.
BOB RENTON

Totally in your right to not care, and while people can say stop the only one who can really shut us up are the mods.
I don't care about your application of engineering ethics, you keep harping on that like a hammer in search of a nail.
I don't need you to agree because I don't generally want validation from people and definitely don't need it from you. Some people feed on conflict, so I'll ignore you and hope you starve.
I'll apply toolmanmike's advice to you to myself as far as this thread is concerned.

 

[themechanic]

I'll appreciate any constructive criticism, whether it's a fellow member or a YouTube influencer. But just issuing a blanket statement that someone doesn't know what they're talking about and should not be trusted is not very helpful and makes an *** of the one who is criticizing the other.

 

[RemCharger]

I'll appreciate any constructive criticism, whether it's a fellow member or a YouTube influencer. But just issuing a blanket statement that someone doesn't know what they're talking about and should not be trusted is not very helpful and makes an *** of the one who is criticizing the other.

That kind of behavior is usually traced back to the parents.