Bought a 70

[T2R9]

Just found a 70 F383HP block to start mine as well. What made you choose that kit? If you have a build plan I would like to follow it and see what other parts you choose. Ths is my first build.

I like a fast revving engine and I plan on running exhaust manifolds so anything larger would have been a waste. Basic plan is about 10-1 compression with 440 Source heads, roller rockers, solid roller cam, we have not chose the cam yet. DP4B intake, AVS2 800 carb, TTI 2-1/2 full exhaust.

 

[T2R9]

The wiper motor came in today from Topher, thing is a work of art. It was literally falling apart when I gave it to him at Carlisle. I also got a correct am radio that will get a modern AM/FM conversion.

 

[eldubb440]

got the Challenger on the spinner and shop rearranged....I'm chomping at the bit to play with frame connectors, but I have a series of loose ends that need to be tied up first..... I got the ends of the dutchman roughed in..... I needed to cut the drip rails, or work around them (butcher the 1/4s) when installing the quarters; so I cut them, of course; dealing with that first..... Bottom of the trunk latch support to the trunk floor needs a little fab. rear bumper reinforcement plates need to be reinstalled.....boring, I know...... more pics coming

 

[T2R9]

Nice as always.

 

[eldubb440]

the process continues..... I'd have it all snapped up tight, but the new clips are loose and need to be pulled out and bent a little. I called it a day

 

[Richard Cranium]

The wiper motor came in today from Topher, thing is a work of art. It was literally falling apart when I gave it to him at Carlisle. I also got a correct am radio that will get a modern AM/FM conversion.

View attachment 1909102View attachment 1909103

Who are you going to have do that?

 

[T2R9]

Who are you going to have do that?

I had Tayman electrical do it. They do nice work. Got notice it Shipped Sunday, 7 day turn around and should have it today. This will be the third one they have done for me.

 

[T2R9]

Pics of the finished radio. Nice job as always. Polished up the lens real nice.