Completely confused

[inhishands21]

Trying to assist restoring a 69 dodge charger with 318 engine. Put original water pump (driver's side inlet) back on and can't figure out which brackets ( 6 in the box ) are used to hold the power steering pump. Will post pics of car and what I have this evening after work.

 

[davek]

Fits Mopar 64-69 Power Steering Pump Brackets Saginaw 273/318/340 Cuda Charger​

 

[Bird 426]

Just keep playing with it, it will all come together.

 

[R413]

Just happen to have a WH41F9 sitting here with the PS pump on it.
Notice the rear bracket is not flat, it has a big step in it.

69 coronet 318

 

[inhishands21]

Just keep playing with it, it will all come together.

Thank you. I definitely have those, just got to figure out how they mount to the block

 

[inhishands21]

Just happen to have a WH41F9 sitting here with the PS pump on it.
Notice the rear bracket is not flat, it has a big step in it.

69 coronet 318

View attachment 1921244

View attachment 1921245

Does that bolt to the wing on the water pump?

 

[inhishands21]

Does that bolt to the wing on the water pump?

 

[R413]

Does that bolt to the wing on the water pump?

It looks like you have a 1970 and newer pump/ bracket and that stuff won't fit a cast iron water pump and timing cover, the lower radiator radiator hose is there.

Look how high the pump is on the photos,mot is next to the water pump pulley, it must be high to clear the lower radiator hose.

Your radiator has the lower hose connection on the pass side, that won't work either.

 

[inhishands21]

Yes, see my first photo above. The inner bolt is into the block, the outer bolt has a nut on the back and goes through the wing or ear sticking out.

That bracket bolted up to your head doesn't go there. It looks like a 1970 and newer bracket and won't fit a cast iron water pump and timing cover, the lower hose is in the way.

Does your pump and bracket look like the one on my photos?

Yes the ones laying on the car look exactly like yours

 

[inhishands21]

Yes the ones laying on the car look exactly like yours

 

[Belvedere408]

These the brackets you have?

 

[inhishands21]

These the brackets you have?
View attachment 1921312

Yes

 

[inhishands21]

The one on the power steering pump has rounded edges. I'll get a picture after work

 

[Belvedere408]

I'll snap a picture here soon of how mine set up for you when I get home.

 

[inhishands21]

I'll snap a picture here soon of how mine set up for you when I get home.

Thank you

 

[R413]

These the brackets you have?
View attachment 1921312

Those brackets you have are 1970 and newer brackets for a passenger side lower radiator hose. They are not going to fit your engine no matter how much time you spend on them.

1969 small blocks have a drivers side lower hose and the PS brackets and set up is totally different.

 

[Belvedere408]

My water pump outlet goes passenger side.

 

[inhishands21]

My water pump outlet goes passenger side.
View attachment 1921393View attachment 1921394

That looks exactly like what we took off, including water pump that was leaking. He had original water pump and brackets in box, and decided he wanted to put that back. Now I just need some help figuring out how they go.

 

[inhishands21]

There is a long story on why the original was replaced even though it wasn't bad.

 

[inhishands21]

The one on the power steering pump has rounded edges. I'll get a picture after work