just a little off the back and sides please

[eldubb440]

should have listened to Mom

 

[qkcuda]

She must have made you clean the pots and pans. You do pretty good work with a Brillo pad

 

[davek]

OK that took 10 minutes, so what have you been doing?

 

[eldubb440]

OK that took 10 minutes, so what have you been doing?

3 days, 2/3 done...... still have the other side to do.... it will be magnificent

the buttweld seams on the wheel houses are a pita

 

[eldubb440]

She must have made you clean the pots and pans. You do pretty good work with a Brillo pad

when I cook, it tastes good and the mess is minimal.........I'll leave it at that

 

[RJ Squirrel]

Just can't stop yourself! I know the feeling. I did the Roadrunner undercarriage work on a lift, reaching up.
Couldn't put my arms down for a couple days...

 

[eldubb440]

Just can't stop yourself! I know the feeling. I did the Roadrunner undercarriage work on a lift, reaching up.
Couldn't put my arms down for a couple days...

I did this crap on a creeper when I was younger......... it's much nicer on the spinner

 

[eldubb440]

in my native south jersey accent.....

"whooda phuk does this ****?"

multiple bottle jack dents on all 4 frame rails, both rear torque boxes, and both ends of the T bar member ......... WTF

some got drilled, pulled, welded........other ones got a section chopped out, beat straight, and welded back it.......and all of it gets a little filler

see signature below

 

[eldubb440]

3 days, 2/3 done...... still have the other side to do.... it will be magnificent

the buttweld seams on the wheel houses are a pita

the above is why I now have 3 1/2 days in it......... about a day and a half, or2; of bullshit repairs

I count at least 23 dents on the pass side....... driver side, same ****

who back in the day phuks up a Mopar with a bottle jack over and over? I'm pretty sure I know the answer