Pg z Classic z bar service kit quality? Anyone used one?

[4mulas]

Just wondering if anyone has ordered and used a PG Classic z bar Kit? Opinions? Any pictures of one laying around you haven’t used yet?

 

[moparedtn]

I got everything I needed from Dan Brewer (Brewer's Performance).
I don't reckon there's much better in the Mopar 4-speed/clutch world than them.

 

[R413]

He is in Canada so shipping and tariff is a consideration

 

[dadsbee]

Same price from Nigel and where I'd buy it from...
1966-76 B Body, 65-73 C Body, 70-74 E Body Complete Clutch Z-Bar-Cross Shaft Service Kit-Repro – National Mo-Parts

 

[4mulas]

Same price from Nigel and where I'd buy it from...
1966-76 B Body, 65-73 C Body, 70-74 E Body Complete Clutch Z-Bar-Cross Shaft Service Kit-Repro – National Mo-Parts

Thanks. I was looking at pg as it would end up being $66 with the current 25% off. I would normally use brewers if I had a big order and like their quality but for a one off I was thinking I’d take a flyer and try PG??
Just that the photo makes them look a little rough so to speak…??

(I need exhaust tips, a shifter boot under console, trunk weather strip, clutch pushrod boot, and was also looking at a set of rear sill plates for 68-70 as none of my local buddies have any used ones available for cheap which puts me over the 429 required to get 25 off, and shipping to me is only $35 for all of it)

Question: does Nigel stock all of this stuff or ?

 

[4mulas]

I got everything I needed from Dan Brewer (Brewer's Performance).
I don't reckon there's much better in the Mopar 4-speed/clutch world than them.

Love brewers and used them alot on other cars but as R413 mentioned exchange at 45% and shipping and duty to Canada makes it not a good idea. On larger brewers orders I had in the past I would drive to a Border town and pick them up myself (about 3 hours away)

 

[dadsbee]

Thanks. I was looking at pg as it would end up being $66 with the current 25% off. I would normally use brewers if I had a big order and like their quality but for a one off I was thinking I’d take a flyer and try PG??
Just that the photo makes them look a little rough so to speak…??

(I need exhaust tips, a shifter boot under console, trunk weather strip, clutch pushrod boot, and was also looking at a set of rear sill plates for 68-70 as none of my local buddies have any used ones available for cheap which puts me over the 429 required to get 25 off, and shipping to me is only $35 for all of it)

Question: does Nigel stock all of this stuff or ?

Forgot about their discount going on...

Pretty amazing what Nigel has stuffed into his garages at National Moparts. All you can do is ask.... I go through the parts listings, copy his part # and price and then send him an email vs using the order form if concerned about "in stock".

 

[moparedtn]

Love brewers and used them alot on other cars but as R413 mentioned exchange at 45% and shipping and duty to Canada makes it not a good idea. On larger brewers orders I had in the past I would drive to a Border town and pick them up myself (about 3 hours away)

I hear ya.
Just so y'all up there know it ain't all one-sided, this costly over the border stuff....
I just received my 2026 calendar from Cold War Motors (a YT channel) that cost $20 for the calendar itself...
and close to $45 in shipping to get it here (bulk of which was Canada postal).

 

[4mulas]

I hear ya.
Just so y'all up there know it ain't all one-sided, this costly over the border stuff....
I just received my 2026 calendar from Cold War Motors (a YT channel) that cost $20 for the calendar itself...
and close to $45 in shipping to get it here (bulk of which was Canada postal).

Canada post is greedy for sure

 

[moparedtn]

Canada post is greedy for sure

It was sort of amusing to watch the tracking on it as well. Origin was Alberta, but that rascal took quite
the tour of Canada before eventually heading this-a-way.

 

[4mulas]

It was sort of amusing to watch the tracking on it as well. Origin was Alberta, but that rascal took quite
the tour of Canada before eventually heading this-a-way.

Yes. I send lots of parts to fellow members in the states and everything at least from Saskatchewan, Alberta, and BC goes to Richmond BC then down to LAX where I think all international arrivals from this side of the hemisphere anyway have to clear customs. Then to the final destination.
I live a 4 hour drive to great falls MT and if I mailed something that’s the route it would take. Instead of maybe a straight line south.

No wonder why postal is so much money.

UPS and FedEx are even worse for us. Rape and pillage pricing there and then they also. Hanger brokerage. And for what. Nothing that what..

I’ve order items from the western states sent USPS and they send a lot of it to the New York customs then back all the way across Canada to me.

 

[440 4 speed]

I have purchased parts from Nigel since very close to the beginning about 25 years. Have always been happy. I have the Z bar bushing set, and it looks very nice.
When in doubt I just call and find out delivery time and availability.

I hear ya.
Just so y'all up there know it ain't all one-sided, this costly over the border stuff....
I just received my 2026 calendar from Cold War Motors (a YT channel) that cost $20 for the calendar itself...
and close to $45 in shipping to get it here (bulk of which was Canada postal).

Next time see if some nice staff member would possibly take it home and mail it as a 20.00 gift.

 

[moparedtn]

I have purchased parts from Nigel since very close to the beginning about 25 years. Have always been happy. I have the Z bar bushing set, and it looks very nice.
When in doubt I just call and find out delivery time and availability.

Next time see if some nice staff member would possibly take it home and mail it as a 20.00 gift.

Thanks, but....who's Nigel?

 

[4mulas]

Thanks, but....who's Nigel?

He means your calendar. If I knew I or another member from around here that’s trustworthy could have mailed it and it probably would have been 20 bucks. If you send packages as a gift from can to USA below a Value of $100 there is no tariffs or duties etc.

 

[dadsbee]

If you send packages as a gift from can to USA below a Value of $100 there is no tariffs or duties etc.

Ya... try that today. My buddies Wife was refused mailing her Christmas cards South yesterday without signing up for the prepaid tariff and duty app and then bringing back the proof she had done so.

USA removed the entire 800 minimum. Send something worth a dollar you have to pay tariff, handling, currency transfer fee... you name it. Why I'm in a sad hold mode on shipping H sliders. I had to prepay everyone's tariffs and fees, adding up to more than they paid for parts in many cases. Still haven't got my invoice to see if they actually took the "estimated fees" or screwed me.