What's it Worth Good price? Mopar 68-70 440 906 Heads on FB Marketplace for $400

[RemCharger]

I've been carting around a few sets of 906's as well. I know I'd never use them. If they really are pro done and fresh then $300 is fine if you want them, otherwise pretty much worthless. Last build with 915's that I gave the works to cost me more than a set of Edelbrocks, in that case it was worth it to me but never again will I do that.

300 bucks for some pro done 906s ?? I'll take em. That's a pair right? I'll take all the pairs. Thanks!


I wonder what the actual full landed cost CDN would be for stealths these days.

 

[mmissile]

I gave my scrapper, all my old iron parts. At least a dozen BB heads...I didn't even look to see what they were. The only thing I sold, were blocks.

 

[TorRed]

if speed is the only measure i agree that aluminum is better, but for those that value a numbers matching drivetrain in 'only' a 383 car might see the original heads as something more. Just my .02

 

[33 IMP]

300 bucks for some pro done 906s ?? I'll take em. That's a pair right? I'll take all the pairs. Thanks!


I wonder what the actual full landed cost CDN would be for stealths these days.

I remember when they were $999.
I'd bet they're $2000 cdn to your door today. (wild-a$$ guess, only).

 

[71SandbugCharger]

No need for numbers matching, as no part of the build is! I'll go with aluminum when the time comes. So far, these look the best for my needs. Edelbrock E-Street Cylinder Heads (Item #: EDE5090) at $1,650 a pair. Maybe at the next SEMA event I can talk Edelbrock into a wholesale cost?!! I wouldn't go to Speedway Motors for much. Recently, I tried one of their 'Stromberg 97' on my classic Ford. It was not a Stromberg internally, but it sure was pretty on the outside!

 

[RemCharger]

I remember when they were $999.
I'd bet they're $2000 cdn to your door today. (wild-a$$ guess, only).

Yes I would say at least.

 

[OKDart]

No need for numbers matching, as no part of the build is! I'll go with aluminum when the time comes. So far, these look the best for my needs. Edelbrock E-Street Cylinder Heads (Item #: EDE5090) at $1,650 a pair. Maybe at the next SEMA event I can talk Edelbrock into a wholesale cost?!! I wouldn't go to Speedway Motors for much. Recently, I tried one of their 'Stromberg 97' on my classic Ford. It was not a Stromberg internally, but it sure was pretty on the outside!

Summit Racing has $120 off $1000 with Promo code SAVINGSP. That'll almost pay for the sales tax.

Edelbrock 5090 Edelbrock E-Street Cylinder Heads | Summit Racing