Recent content by beezee

I have a complete custom spec comp cam solid flat tappet package from Dwayne Porter for a big block stroker BNIB . This was for a 68 Bee 496 ,373 gear ,3000 stall . very strong midrange where you want it . cam spec valve lift .571 in ,.579 ex , 255 ,261 duration @ .050 110 lobe separation...

I have a pair

Drop base is available using a Proform "Ford" #302-350 air cleaner - - - Updated - - - K&N have filter elements for the unsilenced air cleaner 2 3/4 " x13" dia. The silenced air cleaner uses the 3 1/2" x 13" element,have both. Using the drop base to fit a taller intake

Tach Autometer Tach with bracket mounted in ashtray.

Devon,I had a 950 Quickfuel Q-series ,no choke.I have now gone with the Fast EZ port injection and the Quickfuel is every bit as good as the EFI,in fact the carb started better than the EFI. Two pumps and it,s running. With a little heat in the engine I would "touch" the key with out touching...

Hey Mike ,check out PST linkage kit. http://www.p-s-t.com/pst-blog-Mopar-Fast-Ratio-Steering-Linkage-Kit.

https://youtu.be/NwOE7uaDhbs This is where it really counts.

https://youtu.be/mcqkWRSxDOA https://youtu.be/NwOE7uaDhbs Drive to New Hamburg 2015 with some hot muscle. I had to add some music because my dashcam sound was off. Enjoy.

Mike,your air grabber parts look like originals in good to excellent condition. The centre piece is repairable,no missing chunks or broken supports. The air cleaner looks repairable. Check e bay prices ,your sitting on some gold,a little short of platinum.

Just checked ...Cayuga cancelled http://www.torontomotorsportspark.com/dragway/live-updates-from-the-track.html - - - Updated - - - Here,s the add for the air cleaner......... He,s been looking for this for awhile...

Carter factory carbs have a tin tag on the top corner.Look on the base for stamping,s or choke horn. Not sure for Cayuga tomorrow,Frank would be wanting to go . So far I see no cancellations.

Mike ....Does the air cleaner have a chunk cut out of the backside? Ram Chargers and Air Grabbers had 3 speed wipers to clear the air cleaner.

Mike ,you have some rare and valuable stuff there. There,s a fellow in Lindsey looking for that air cleaner,looks mint. Should ask 400-450 for the air cleaner.The K&N filter is $100 plus. If you have the carb #,s I can see if it,s a factory 69 383 carb,4 speed or auto.

Any fall tours planned Tom.Sarah did such a great job in the spring.

Just used the clamps supplied with the fuel pump and fastened to the floor with self tapping screws.The efi fuel line is cable tied to the original fuel line.