Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Have patience, set aside a decent block of uninterrupted time, and enjoy the process. The grille on these cars is part of the magic. I taped off the back, used an etcher, and then sprayed. Use lacquer thinner on a Scott towel (or q-tips) and gently remove overspray from chrome parts. The face...
I’d like those please.
Dana Weeks
115 Kucey Cr.
Saskatoon, SK
S7N4T2
Cell number 306-292-6259 (text fastest best for me.
Let me know the total and how you’d like to be paid. I am good with whatever you like.
Thanks you so much! I really can use those.
They can be fixed, check into the 66/67 charger section on FBBO. Electroluminescent dashes are the cats ***. Mark Gibson is on here and can direct you. There are others as well. Awesome cars!
It’s a weird feeling at the line when you load the converter and feel the tranny trying to join you in the passenger cabin.
The other solutions are long run better but you can bolt a chain from the block to the cross member or airplane wire. I’ve used a chain for years. Quick, cheap and easy...
Sorry for the the long delay, haven’t been on for a while. The d60 caused problems, different length drive shaft and bangs the stock gas tank. My car is basically stock, so I put the 8 3/4 back in and removed the 1/4” alum shims at the front shackles so it’s stock again.
Big issue with Gen 1...
That makes sense- thanks. I was assuming you weren’t putting interior in with the cage etc. My street car full tank, no driver is 3900 ish, mostly stock. I was also assuming Disk brakes, lighter mill, no undercoating etc. Well, you know what that say about assuming.
Great looking car, and I...
I bought a used set of 1 3/4 TTI headers and called up for the exhaust (3”) on my 67 Charger. Customer service was awesome- ordered through my local shop, everything was slick. 2016. Install was so smooth I thought I’d missed something. I used step clamps (headers were already in) and was...