• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by German_Mopar

  1. G

    Converting 1966 Steering Column from Column to floor shift

    I have a green interior, color matching that could be an issue....
  2. G

    Converting 1966 Steering Column from Column to floor shift

    Thx a lot guys. I am not willing to spend hundreds of Dollars for a used column and again 200 bucks to ship it to germany. Will do the same with jb weld.
  3. G

    Converting 1966 Steering Column from Column to floor shift

    Hi, I am converting my 1966 Belvedere with a 727 Coloumn Shift to a 4 Speed manual. I want to get rid of the shift indicator on the column. The collars I can find are only 68 and up, I guess they are different and you need a 66 one ? Next question is: The lever at the end of the column for...
  4. G

    FOUND A833 23 Spline

    I am looking for a A833 transmission, 23 Spline for my 66 Belvedere. Needs to be in good shape, or even better rebuild. It needs to be shipped to germany (!) Claus
  5. G

    Where to buy a A833 supplier recommendations ?

    Shipping a car from the us to germany is not done for a 1000 or 2000 bucks to my door. Buying a big block b body manual car is not cheap also. And I have no space to Park another car. So it makes no sense to buy a whole car for me.
  6. G

    Where to buy a A833 supplier recommendations ?

    No I didnt expect it to be cheap - I think it is a high price- nevertheless I decided to do it. There is no parts car in germany you can buy from a junk Yard.....
  7. G

    Where to buy a A833 supplier recommendations ?

    Thx, I wrote Passon a Request:) 5 speed was my first thougt, but it was even more expensive, measure the drive shaft and ship the drive shaft then to germany. I had a quote from silver sport for 7000$....with no drive shaft. You can add around 15 to 20% for Taxes and the drive shaft with extra...
  8. G

    Where to buy a A833 supplier recommendations ?

    Hi guys, I am Planning to swap my 66 belvedere 383 with thw 727 to a A833 this Winter. I have a quote from Brewer, but there lead time is 9 Months for the transmission....to long of a wait for me. Can you recommend me some other (trustable)suppliers? Needs to be shipped to germany.... Thanks...
  9. G

    Holley street avenger vacuum chocke pull of

    Thx for your reply. Yours has the vacuum pull off. I contacted holley about my choke issue and didnt get an answer for 1 Week now. Not a good customer Service. My vacuum Port for the choke is blocked. Best way to get it out without metal flakes going to the engine....dont know yet. I am...
  10. G

    Holley street avenger vacuum chocke pull of

    Hi guys, I have a Problem with my holley street avenger on my 383. The first Minute of runtime of the cold engine, it is way way to rich, smokes and wants to die. The Problem is, that the choke plate is completely closed. It takes the minute to heat the choke spring to open the choke plate a...
  11. G

    26" Shroud and aluminium Rad - gap

    Hi guys, My 66 Belvedere has a 26" inch Champion Radiator. It works fine, but in summer time the Temperature rises a lot during idle in traffic. I added an electric fan in front of the Rad, which helps. If I start moving again Temperature drops really fast to normal. I think the Problem ist...
  12. G

    Torsion Bar installation question

    I put them in on the "wrong" side and it works perfect. Car sits on proper ride height, adjuster bolt is perfect.
  13. G

    Torsion Bar installation question

    Because now they fit nearly as the factory ones, I can put them in with the upper control arms conected and Set the preload with the adjusting screw.
  14. G

    Torsion Bar installation question

    Foubd the Issue!!! The New ones are marked wrong left and right. Put I the left one on the passenger side it fits perfect....the Otter akde the same
  15. G

    Torsion Bar installation question

    I installed the old ones 0.88 now and they slide in perfect as it should be. Compare I the old and New ones, the clocking is minimal different, thats the issue I guess
Back
Top