• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by MAG GT

  1. M

    A518 SWAP

    The A518 fits into Magnum with out any floor mods. Need to modify the transmission mount cross member and the torsion bar cross member for more clearance at tail shaft. The next tricky part is going to be modifying the floor shifter linkage, need to move linkage over by about 3/4 inch to clear...
  2. M

    Let's See Your Late B-Body

    thanks for the reply
  3. M

    Let's See Your Late B-Body

    Hello Do you sell any parts? I am restoring a 79 Magnum Gt and need the Wheel Lip Moldings like on the gray car in photo. Thanks Russ
  4. M

    iso-crap rear spring mounts questions

    I have a 1979 Magnum GT with 5 leaf set up. I ended up ordering urethane biscuits for a Aspen with 5 leafs (same thickness just about a 1/2 inch shorter in length) Auto Rust Technicians sell U brackets but do not list for B body. I e-mailed them for dimensions but never got a reply. Good luck...
  5. M

    5.9 Magnum swap questions.

    Working on doing the exact same Magnum swap. Using the factory EFI and A518 OD. Did you fit the over drive into the car? From what I see on our cars the OD is past the torsion bar cross member, only the rear trans mount would need to be fabricated. Please update your progress. Thanks
  6. M

    LEAF SPRING Insulators

    UPDATE COULD NOT FIND ANY INFO SO I ENDED UP ORDERING ENERGY SUSPENSION KIT 5.6106G FOR DODGE ASPEN. RECEIVED PARTS LOOKS LIKE THE ONLY DIFFERENCE IS THEY ARE ABOUT A 1/2 INCH SHORTER THEN METAL BRACKETS. JUST TO LOOK GOOD I WILL CUT THE BRACKET DOWN ON EACH END BY 1/4 INCH. HOPE THIS INFO HELPS...
  7. M

    LEAF SPRING Insulators

    I watched your video, excellent resto of the Cordoba Your carI think had 4 leaf springs, mine has 5 Do you think the insulators are the same but the metal U bracket is larger for the extra leaf. I seen a web site Rust Technologys which list two sizes of metal U brackets but do not have any...
  8. M

    LEAF SPRING Insulators

    Looking for a supplier for leaf spring insulators for 1979 Dodge Magnum. My car has 5 leaf springs. Listing seem to be for years up to 1976 then jump to 1980. Any help would be appreciated.
  9. M

    1979 dodge magnum rear leaf spring shackles

    UPDATE: Received new shackles for Cordoba, but they are not the same as Magnum. The new shackles are about 3/4 inch shorter in length then the Magnum. Should work, just a little lower, I had the springs redone so ride height should be fairly close. Thanks Again
  10. M

    1979 dodge magnum rear leaf spring shackles

    Thank you for the reply
  11. M

    1979 dodge magnum rear leaf spring shackles

    Does anyone have part numbers for these shackles? Seems to be no info around. Listing show part numbers for 1979 Chrysler Cordoba but no Dodge Magnum. Are the shackles different? Thanks for any help.
  12. M

    A518 SWAP

    I have the A518 already and my friend is a trans re builder is doing the work only for cost of parts. We emptied the case so will try to fit into car first to see how much modification is required. I will bring up the A500 to him and ask his opinion. Thanks for your input.
  13. M

    A518 SWAP

    I seen a lot of pics from older B bodies, do not know if things changed when the car was redone from 1975 to 79. Not much info about these years. Would the cross member be the same? I seen on one site that they sell a cross member for A518 for older B bodies. Thanks for you input.
  14. M

    A518 SWAP

    Thanks For the link I am looking at the EFI more for convenience of being able to get in car after sitting for months and have it run consistent. As for the wiring I did my friends 65 Comet with a 5l out of a 88 Crown Vic and it worked out. Thanks again
  15. M

    A518 SWAP

    I am doing a magnum swap with with factory EFI so the computer will handle the OD and lockup. We have emptied the A518 to use only the case to do the change fabrication work.Plan is to use 373 gears. Thanks for your reply
Back
Top