Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Have a leaking heater core. Trying to figure out how the heater box comes out...looks like it's all one piece from the pass. door post to the steering column. I see the screws at the bottom, but not sure how else it may be attached. Looks so nasty I'm considering bypassing the core. Forever...
Motive Gear set. The pinion bearing sat all the way flush because it's got a matching radius. BTW, thanks for your earlier post. The excellent info you provided was just what I needed. You and DVW convinced me that I was doing it at least halfway right.
Now if it holds up!
Well, after the helpful responses, this is where I ended up. Zero shims under the inner pinion bearing. Guess I'm gonna have to accept this, I'm all out of adjustment options.
This is with 30 in/lbs. of pinion preload and .008 backlash. Any other suggestions (other than pay someone...already got...
OK, thanks. I have another question though- I have already removed the original beveled shim from under the inner pinion bearing and replaced it with a couple from the gear kit that are slightly thinner. Is that kosher? Starting to make me a little nervous. It seems like I'm getting the pattern...
First time I've tried setting up my own gear. Last time I paid a guy to set my 3.91 up...sounded like a freight train coming, drove it from my kids house to mine and sheared 6-7 teeth off the ring gear. When I pulled it, the pinion had about 1/4" of end play.
So here I am, schlepping and...
Ordered (online) a new 3.73 ring and pinion for my 741 case. Opened it up and found a 29 spline pinion, opposite of the existing10 spline yoke I was planning on using. New pinion has 7/8" thread and larger lock nut than the 10 spline.
The question is, can I get a 29 spline yoke that uses the...
Smoke light switch every time? You have a short somewhere, or bad connections? Light switch gets hot in the off position, or when it's on? Better description of the problem would help. There's a lot of guys here that have a ton of knowledge and are willing to help.
Well, I got a new headlight switch and installed it. Got the left side dash lights back, and the new switch has a ground tab on it. Maybe they figured out they have grounding issues? So, why did only half the lights come back?