Recent content by Polara383500

I was gonna get a Holley one there around 40$ and try it!

Ok and just have to take the top off and make sure there set right. Just have to make sure the meter rods are out when putting it back together!

Yeah I have to put it to the floor to get it to start

Yeah and when you put it in gear it loads up and stalls!

While it’s running it bounces around so putting a regulator on it to 6 pounds should fix it?

Ok installed a new avs2 awhile back. I have got around to driving it cause if working hrs. Car idles great but as soon as you put it in gear it’s stalls! I heard that it could be dumbing to much fuel! I put on a fuel pressure gauge and its a stock pump and it’s reading 11 to 12lbs and they...

I think there all wet! One on the driver was the 2nd from the front. The passenger is the 1st one from the front! I cleaned the threads the studs are tight going in! I’m gonna redo those two and if has a lil leak I’ll try a lil bar leaks.

I used the stuff in the white jar but it’s still leaks. I let it set up before putting water and heat back into the motor

I’m using studs!

I have one bolt on the passenger side and one on driverside that are leaking coolant. I’ve tried the stuff in the white jar. Is there can I use the stuff in the tube or what is a better option.

Got it! Lol

How did you link in a post

It’s says that it doesn’t fit my yr but I think they all the same from.

I have those and they don’t cover the whole manifolds

High Performance manifold