Recent content by s5757s

Thats a Motorola unit that was an option on many early 60's vehicles. My 64 Polara came from the factory with one and i'm just getting ready to re-install it after complete re-paint. This unit is only part of the system. In addition to that you need the under dash mounted box which contains the...

Super Stock / D Automatic. Back in the day they destinquished between automatic and manual shift classes

I have a 64 Polara and my question is regarding the plastic portion of the steering wheel. Did Mopar use the same basic plastic steering wheel on the 65 Coronet. I realize the horn rings and center emblems are different. Found a really nice 65 coronet steering wheel (bare plastic portion only)...

Looking to buy indoor car cover for my 64 Dodge Polara. Any recommendations Thanks

The oil pan is pretty low, maybe too low for the street. Good Luck

I believe you can get those clips from themoparshop.com / Madera, CA

The e brake cable in my 64 Polara 2dr hdtp measures 116". Hope this helps.

Picture uploaded. Hope its ok, 1st time doing a pic. Thanks

I have a wierd/strange water pump pulley that has an internal spacer spot welded on the inside of the mounting surface. Has original orange paint (unknown origin and don't know what it came off of ? Could be slant 6, 318, 340, 383, 400, 440 ? Measures 2.75 tall and 5.75 O.D. Is this something...

How did you get the roll pin out ? I've tried the smallest punch I have and also a ground down nail and only got it to move about 1/8" Any ideas ? 64 Polara Thanks

I got mine from SRP 213455 back in 2014. Good luck

# 1 - I'm using a cast iron 62-64 water pump housing 2205862. My federal ps pump bolted right up but the pulley does not line up with the 2 groove crank pulley I have installed. Originally the 413 that I'm working on had a 4 groove crank pulley & by doing a quick measurement that pulley would...

Best way to ship a trunk lid from Oregon to Montana. Thanks

Whats everybody using ? Thx