I have the following splash shields. Pretty sure they are all for 73-74 Dodges.
1) The long pieces go on the sides of the radiator and are held on with large, rectangular headed plastic clips. Can anyone confirm the years and models they fit?
2) The small pieces, found a photo that shows them at the top of the door hinge, inner fender area. Again can someone confirm the years and models.
3) The larger square pieces. Have 6 holes and 2 slits. 2 of the holes are at the ends of the slits and I'm assuming those aren't mounting clip holes but more like holes to stop the slits from tearing. ANY idea where these go? Picture would be great! Again, years and models.
I HAVE and am familiar with the large, passengers engine well splash shield for 73/74 Dodge big blocks only.
I also have and am familiar with the engine well splash shields for 71-72 B bodies. These are very similar to the E body ones.
Also have and am very familiar with the LARGE question mark shaped 71-72 Plymouth splash shield that goes behind the headlights and also the square splash shields that are held on with large round headed clips that go over the front bumper brackets.
Do 71-72 DODGES have similar front bumper bracket and headlight splash shields? If so anyone have a picture or have some they'd like to rent or sell. I could replace with new when I'm done.
I also posted in the wanted section that I'd be willing to buy, rent or provide replacements for a complete set of splash shields from a KNOWN car, WITH pictures of where they go. Especially interested in 62-65 B bodies, 62-66 A bodies and 71-74 Dodges.
Thanks! [email protected]
1) The long pieces go on the sides of the radiator and are held on with large, rectangular headed plastic clips. Can anyone confirm the years and models they fit?
2) The small pieces, found a photo that shows them at the top of the door hinge, inner fender area. Again can someone confirm the years and models.
3) The larger square pieces. Have 6 holes and 2 slits. 2 of the holes are at the ends of the slits and I'm assuming those aren't mounting clip holes but more like holes to stop the slits from tearing. ANY idea where these go? Picture would be great! Again, years and models.
I HAVE and am familiar with the large, passengers engine well splash shield for 73/74 Dodge big blocks only.
I also have and am familiar with the engine well splash shields for 71-72 B bodies. These are very similar to the E body ones.
Also have and am very familiar with the LARGE question mark shaped 71-72 Plymouth splash shield that goes behind the headlights and also the square splash shields that are held on with large round headed clips that go over the front bumper brackets.
Do 71-72 DODGES have similar front bumper bracket and headlight splash shields? If so anyone have a picture or have some they'd like to rent or sell. I could replace with new when I'm done.
I also posted in the wanted section that I'd be willing to buy, rent or provide replacements for a complete set of splash shields from a KNOWN car, WITH pictures of where they go. Especially interested in 62-65 B bodies, 62-66 A bodies and 71-74 Dodges.
Thanks! [email protected]
