beach-boy64
Member
i got a set of doug's d452 headers for my 64 s/fury 383. they don't clear the idler or pitman arms. got any ideas to help solve this? don't want to beat headers up, they are ceramic coated.
doug's headers on 64 s/fury 383
- Thread starter beach-boy64
- Start date
furyus
Well-Known Member
- Local time
- 9:44 PM
- Joined
- Jan 5, 2010
- Messages
- 1,719
- Reaction score
- 1,093
- Location
- weeki wachee, florida
Send them back and get a set of Hedmans for alot less. Fit them to the car first in case you need to make adjustments, then send them to be coated. Mine have been on my 64 Sport Fury for over ten years. Must be used with Dakota starter.
Last edited:
Moparsmitty
Well-Known Member
I'm with Furyus on the Headmans. I have them on a 64 Belvedere and I like them. From what I've seen and heard, they just fit better than the others. I like the idea of getting them in and making sure that they fit just right and then sending them out for ceramic coating. More work, but better than hammering or torching on a set that's already coated.
beach-boy64
Member
thanks, guess that's the thing to do
Sonny Black
Well-Known Member
Sonny thinks; spend the money and get TTI
- - - Updated - - -
Sonny thinks; spend the money and get TTI
- - - Updated - - -
Sonny thinks; spend the money and get TTI
RustyRatRod
Well-Known Member
Simple solution. Get the right headers. The D452s are not the right ones. D451 fits your application.
beach-boy64
Member
thanks guys, the d452s will fit and was much easier than i thought. b and rb blocks aren't that different.
RustyRatRod
Well-Known Member
That's awesome. Because in the book, the are listed NOT to fit a 383 in those cars. Almost makes me wanna send back my D451s. Almost.
Similar threads
- Locked
