needing performance head for 440

Dominic Torreto · Dec 25, 2013

Got a 70 dodge charger with a 75 440 ram charger motor want heads that will work well with a 871 root style blower any suggestions or does anyone have anything they willing to sell? Contact me at "no phone numbers in ads" only have texting right now or leave message on here for me or e-mail at "deleted by staff - read the ad rules" thanks
Jon

rave_12000 · Dec 25, 2013

I have some fresh 906 heads?

Hemi Rebel · Dec 26, 2013

Ideally aluminum heads would be what you want, but factory iron will due. Does your 75 engine have heads? They will work. I would be more concerned with the cast crank and pistons in that engine than the heads if you plan on running anything more than 5 pounds of boost

wedge69 · Dec 26, 2013

Dominic Torreto !?!
Didn't you have the Black Blown charger ??
:disgust:

Montclaire · Dec 26, 2013

Get out the credit card and order a set of 440 Source heads and a crank/bottom end.

67 B-body · Dec 26, 2013

If I were building this engine, I would have a steel crankshaft, good rods "probably H Beam 4340", Main stud girdle, Forged pistons (about 8:1 comp), Good 2" primary headers to 3.5" exhaust..... Turn it up to 8-10 psi, and have fun!
Get a good ignition system on that thing too!!!!!!!!

MikeyT · Dec 26, 2013

wedge69 said:
Dominic Torreto !?!
Didn't you have the Black Blown charger ??
:disgust:

yes, and now him and the mad scientist will need to tear the engine apart to fix it.

Oh to answer Dom, I got a set of 915 heads with mild port work done to them.

Mike

needing performance head for 440

Dominic Torreto

Well-Known Member

rave_12000

Well-Known Member

Hemi Rebel

Well-Known Member

wedge69

Well-Known Member

Montclaire

Well-Known Member

67 B-body

Well-Known Member

MikeyT

Well-Known Member

Similar threads