• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Look what followed me home

mrsnicks

Well-Known Member
Local time
6:45 PM
Joined
Feb 19, 2013
Messages
616
Reaction score
192
Location
cameron, nc
1971 Plymouth Satellite Sebring.

360, auto, console shift, bucket seats, p/s, a/c, tinted windows, 8 3/4 rear end.

I didn't really need another project, BUT price was right and most importantly it was ALL there and unmolested. No hacked up repairs, no shoddy replacements, etc...

I plan to get it running for minimal $$ and everything working and drive the piss out of it!

That being said looking for the following:

Upper horn
fan spacer and bolts
fan
Passenger side marker light assembly
Trunk lid (close to 27330 or shipping will kill me)
Passenger fender
Front lower valance
rear bumper

New Addition.jpg
 
Last edited:
Nice find. :thumbsup:

Do you know what depth you need for the spacer? I have a few of them, some with the bolts. Thanks
360 engine.. No shroud. Where/how should I measure? From the pulley to the radiator and see how much room there is?
 
360 engine.. No shroud. Where/how should I measure? From the pulley to the radiator and see how much room there is?


Probably the best way. Also are you going to use a clutch fan? If so you would have to factor in the depth of a clutch fan vs a non clutch fan. Maybe someone will chime in with info.
 
If you need any info, I have a '72 Charger with a small block in it.
I'm not 100% sure, but I don't think there's a spacer on the fan.
Mine's got a 7 blade fan w/clutch.
I can check tomorrow.
 
Auto Transport Service
Back
Top