I would sleeve it. Easy peasy.
No, I have never had a problem with any I used from napa. Myself I put a wipe of gasket seal on when sliding it on a yoke or balancer. New seal in the cover and a little lube and install.Does that include some form of milling?
That’s exactly what my uncle told me about getting my car aligned, if there’s nobody with grey hair you’re at the wrong place lol.No, I have never had a problem with any I used from napa. Myself I put a wipe of gasket seal on when sliding it on a yoke or balancer. New seal in the cover and a little lube and install.
If you do go this route, when you go to the parts store look for a counter guy with grey hair.
should I replace this thing, or is it probably ok? And does this sort of wear bother anyone, to where I should start looking at other parts as a problem?