MSD ready to run work with ramcharger ductwork?

hunt2elk · Jun 9, 2019

https://www.summitracing.com/parts/msd-8386/make/dodge

Have any of you guys used this distributor on a Super Bee or Road Runner that has the fresh air ductwork and oval filter? It is listed as being more than an inch taller than a stock unit. Just dont want to an issue with it hitting the base plate or seal.

dadsbee · Jun 9, 2019

I'll go look.. I don't think the cleaner comes out that far..

Height probably not an issue.. the diameter would be the question as I picked up an MSD at an auction and they're huge.

GetX'd · Jun 10, 2019

If I get what you’re asking correctly - I have that MSD distributor in my GTX. I also have a six pack set up on it thus the correct air cleaner for same. That would be the oval set up. I don’t have any clearance problems. Everything works well and clears well.

hunt2elk · Jun 10, 2019

GetX'd said:
If I get what you’re asking correctly - I have that MSD distributor in my GTX. I also have a six pack set up on it thus the correct air cleaner for same. That would be the oval set up. I don’t have any clearance problems. Everything works well and clears well.

Exactly what I wanted to know, thanks. Do you like the MSD, or would you go another route if doing it again?

GetX'd · Jun 10, 2019

hunt2elk said:
Exactly what I wanted to know, thanks. Do you like the MSD, or would you go another route if doing it again?

I love,the MSD.. Would buy it all over again. Worth the $$. Good luck!

dadsbee · Jun 10, 2019

Straight on shot and underneath..

MSD ready to run work with ramcharger ductwork?

hunt2elk

FBBO Gold Member

dadsbee

FBBO Gold Member

GetX'd

Making Life Great Again!

hunt2elk

FBBO Gold Member

GetX'd

Making Life Great Again!

dadsbee

FBBO Gold Member

Similar threads