NHCharger
Well-Known Member
I want to check the angles on the driveshaft and rear end to make sure everything is with in tolerance. The 1969 FSM shows how to do this but they are using an old fashion bubble level. When I built my 68 Charger several years ago I had found the process on how to check it and the angles were in degrees. I cannot find that info right now.
Does anyone have this process showing the minimum and maximum angles for a 69 Charger, 440/auto.
Thanks,
Brian
Does anyone have this process showing the minimum and maximum angles for a 69 Charger, 440/auto.
Thanks,
Brian