Runningman20
Well-Known Member
THANK YOU!!
Lizard Skin
- Thread starter Runningman20
- Start date
THANK YOU!!
Runningman20
Well-Known Member
Did you mask off any of the areas of the firewall that gets parts mounted to it?
- Local time
- 12:26 AM
- Joined
- Jul 17, 2008
- Messages
- 19,225
- Reaction score
- 53,189
- Location
- South Jersey USA
I masked everything...... take the time to do it, tape the backside of any holes
and the grey sound deadener holds paint nicely, I put a thin coat of epoxy primer over it just prior to paint to ensure adhesion
Last edited:
Runningman20
Well-Known Member
- Local time
- 12:26 AM
- Joined
- Jul 17, 2008
- Messages
- 19,225
- Reaction score
- 53,189
- Location
- South Jersey USA
I masked the firewall side, inside I coated everything..... the car isn't yet built, but we aren't concerned about it at all. actually I never gave it a thought...... I'm thinking the material will actually work as a gasket
Runningman20
Well-Known Member
Ok thanks, I couldn't tell from the pics. I think it will also but wasn't sure. I guess I could email Lizard skin and ask
68Moparmaniac
Well-Known Member
It goes on great, seems pretty durable and no clean up. Kicker is you need to buy the special gun to apply. When your done with the can you just toss it. Gun never needs cleaning.
Runningman20
Well-Known Member
Excellent, did it seem to deaden the floor quite a bit?
68Moparmaniac
Well-Known Member
Haven’t been out on the road so I can’t say. I used it more to seal and protect the bottom.
Markzx14
Well-Known Member
I'm also interested in this and the job you did looks great. I'm going to read the thread
Similar threads
