westjay194
Member
Has anybody here done this swap & kept the 62-64 push button transmission?
It is a 62 dart the first b bodyWill it even fit?
The 60-62 Darts were not considered A body cars, right? Were they the first run of B bodies? If so, no chance it will fit without some serious modification.
The 63-66 Dart and Valiants used a K member unique to the chassis. The 1967-76 model A bodies had identical frame rail dimensions so any car within that range can accommodate any K member from that era. Outside of that, nothing else fits. Push button transmission fitment has nothing to do with the K member.
Yes the cross member has been modified, but it needs help.I think the OP is concerned about the trans crossmember working ???
Hey, Is English your first or second language ? It seems like you are either confused with how to phrase your question or are very new to these cars and what stuff interchanges.It is a 62 dart the first b body
68 k member with 383 disc brakes
Is good. Problem with my tail shaft housing cracking.
Thanks
Thanks for the great information.Hey, Is English your first or second language ? It seems like you are either confused with how to phrase your question or are very new to these cars and what stuff interchanges.
You realize the K member means the engine crossmember? No A body K member will fit a B body car no matter what year.
Also....A 383 has no brakes, drum nor disc.
Plenty of helpful people here BUT you need to ask questions in a way that makes sense.
Plenty of helpful people here BUT you need to ask questions in a way that makes sense.
Getten uppity.Maybe you are used to people that speak gibberish. I try to associate with people that don't speak "Wal Mart".
The thread title and content don't match.
Check you pinion angle relative to the drive shaft. It should be 3-5 degrees down. Had the same problem with our '63 until we added wedges under the axle perch to correct the angle.It is a 62 dart the first b body
68 k member with 383 disc brakes
Is good. Problem with my tail shaft housing cracking.
Thanks
Maybe you are used to people that speak gibberish. I try to associate with people that don't speak "Wal Mart".
The thread title and content don't match.