BeepBeepRR
Well-Known Member
I'm installing a M&H harness but want to make sure I have it routed correctly. Does anyone have a picture of a dash where I can check out the original routing of the harness? I would very much appreciate it.
Awesome thanks very much. You have me sorted out now. There is a 3 wire plug that comes out of the steering column and I have nothing to plug that into. Any idea what thats for? The schematics do not show this. I thought it might have been for cruise control but the column is sort of plain. Nothing special about it. The wire colors are more of a pastel color set. I'll get a picture of it.1st pic, AC wires. Green blower, blue clutch. It runs to bulkhead. Just at a side of a white and white with black trace wire, on the NSS harness section of bulkhead. Those wires inserts there. Can't recall which one on which cavity thought. I have diagrams but is late here to check my PC. Will tell you tomorrow.
2nd pic, lights on warning buzzer plug. When optioned, that plugs gets an extra harness to reach the buzzer.
3rd pic, that's an accesories source. Noticing you have AC harness, that must be the terminal to the clutch being feeded. Underdash harness got a yellow rubber mold with three female provisions with a tan wire hanging around, close to brakes pedal area. That wire conects there
4th and 5th, is the headlights wiring and that's the plug to trigger the hideaways on Chargers.
I went back and re-read your post. I think I got it. Yes the Green with that blue is the blower wire. I need to stab them both into the bulkhead and use the green one for the blower feed. Got it.. Sorry I didn't re-read that post.
View attachment 1059165