diesel_lv
Well-Known Member
I bought the 2 rubber 90° elbows for my '67 in Jan '20 from AMD, and now after just over a yr they are both cracking/rotted. Can anyone recommend a "Quality" set of 90° filler hoses, the large and small ones. Thanks.
Fuel filler rubber elbows
- Thread starter diesel_lv
- Start date
Ethanol gas?
The rubber they make them outta is garbage....my dads 66 Charger did the same thing. My buddy has a fuel neck seal needing replacement after one year in his coronet as well.
R413
Well-Known Member
I bought a Gates fuel hose from rock auto 1.75” diameter with a 90 degree bend for a van.
I would think Gates would have good materials.
Then there is this place, they have all kinds of hoses, necks and such.
https://www.fillernecksupply.com
I would think Gates would have good materials.
Then there is this place, they have all kinds of hoses, necks and such.
https://www.fillernecksupply.com
diesel_lv
Well-Known Member
Yes, "All" gas where I live is 10%.
As @R413 said get the Gates big hose. I haven't found a Gates replacement for the small hose yet.
Gates large elbow number 24717.
If you can get them in a marine supply store they will be better quality than the ones that cracked.
Similar threads
