FBBO Benefit Auction for @CudaChick1968!

diymirage said:

you're a member over on FABO as well, correct?

would you mind putting the bid on Steve's shifter in his thread?

Benefit trinkets for Leanna | For A Bodies Only Mopar Forum

Click to expand...

No prob

Trying to figure what to offer.....

I will "offer up" Item :
Mopar Factory 426 Hemi intake, slightly modified, (Arlen Vanke Mod)
Factory casting date and the "P" and "S" stamp from the 1969/1970 Era:

Item # 30 $50

Darter6 said:

1 more small item for donation. A set of fender/quarter Road Runner decals
View attachment 1158191

Click to expand...

Very nice indeed, thanks! Adding:

Current Auction List:

Item #1: Brewer's trans crossmember donated by @moparedtn (Post #1)
High bidder: $50.00 by @davek

Item #2: Cool vintage oil can donated by @Beekeeper (Post #2) !
High bidder: $25.00 by @Bb70charger500

Item #3: TWO AUCTIONS - Beautiful hand-turned potpourri containers and tops donated by @Red63440 (Post #5) !
High bidder #1: $65.00 by @haywire 440
High bidder #2: $100.00 by @diymirage


Item #4: Brand new USA made big block rocker shafts by @69 Sleeper Bee (Post #12)!
High bidder: $75.00 by @68GTX4SPEED

Item #5: Beautiful refurbished small block valve covers w/breather and PCV from @dadsbee (Post #14 and Post #76) !
High bidder: $80.00 by @Builderguy

Item #6: NICE NOS Superbird wing decal set in black from Jerry @Jerry Hall (Post #17) !
High bidder: $100.00 by @haywire 440

Item #7: Beautiful 1970 NW Territories POLAR BEAR license plate by @Sahara (Post #25) !
High bidder: $1,000.00 by @440+6

Item #8: Mopar P5249712 SB rocker hold downs new in box and Made in USA by @440Coronet500 (Post #33) !
High bidder: $50.00 by @drhill

Item #9: Mopar RB electronic ignition (distributor, orange ECU, coil & harness) used by @Sahara (Post #36) !
High bidder: $125.00 by @68GTX4SPEED

Item #10: NOS Mopar cap, rotor, points and condenser (single points) for the winners' application by @HALIFAXHOPS (Post 44) !
High bidder: $35.00 by @monaco66coupe

Item #11: REALLY nice set of (4) "poverty" Plymouth hubcaps from a 1967 GTX by @dan juhasz (Post #45) !
High bid: $100.00 by @Wojo68

Item #12: NEW IN BOX Holley Street Avenger 770 carburetor by @Woodruff Carbs (Post #50) !!
High bidder: $225.00 by @tmaleck

Item #13: A pair of very nice Mopar-themed license plates by @Darter6 (Post #64) !
High bidder: $150.00 by @Ironbuilt

Item #14: Mopar factory chrome fuel door for Dodge RAMS '09-'18 by @JoePole (Post 62) !
High bidder: $20.00 by @monaco66coupe

Item #15: “Off the Wall” 18" x 24" wall art picture - 3 angles of a ‘68 Hemi Charger RT by @haywire 440 (Post #74 + Post #144) !
High bidder: $25.00 by @Sahara

Item #16: 66/67 blower motor assembly, tested and cleaned by @Durandal25 (Post #80) !
High bidder: $

Item #17: Antron Brown Top Fuel Drivers' Suit by @Darter6 (Post #105) !!!
High bidder: $100.00 by @jmk77379

Item #18: Big Block Oil Pan, freshly painted hemi orange, clean and dry w/baffle by @Ghostrider 67 (Post #110) !
High bidder: $100.00 by @Sahara

Item #19: '65-'66 Plymouth 10" hubcaps by @khryslerkid (Post #111) !
High bidder: $

Item #20: Set of Dodge aluminum Redline hubcaps, nice used by @Part Stalker (Post #112) !
High bidder: $150.00 by @69 Sleeper Bee

Item #21: Nice set of used 3" rear shock plates by @Part Stalker (Post #114) !
High bidder: $50.00 by @coloradohill

Item #22: Unique, very cool P-51 Mustang replica made from beer cans from @sam dupont (Post #117) !
High bidder: $100.00 by @69 Sleeper Bee

Item #23: NOS '69-'70 Charger rear emblem part number 2902306 by @Part Stalker (Post #143) !
High bidder: $100.00 by @f569

Item #24: Nice pre-owned '67 GTX flip top gas cap and bezel by @Don Frelier (Post #149) !
High bidder: $100.00 by @Beekeeper

Item #25: New CVF 90° billet manifold for a Sanden peanut style AC compressor #7B10 by @Mike67 (Post #163)!
High bidder: $

Item #26: Pre-owned Edelbrock Performer #2101 intake manifold for SBC (winner pays shipping) by @RustyRatRod
(Post #165) Note: Possible previous repair (see Post #199)!
High bidder: $25.00 by @Bb70charger500

Item #27: One set of taillight assemblies for a 1970 Satellite by @NJRR (Post #92) !
High bidder: $

Item #28: Mopar #2841887 Charger emblem, which is believed to be for the 66-70 Charger sail panel by @Part Stalker
(Post #179 for details) !!
High bidder: $40.00 by @Outlaw525

Item #29: Ken Ament Hartford Michigan Chrysler Plymouth license plate topper by @Part Stalker (Post #179)!
High bidder: $

Item #30: The "King Richard" packaged LOT deal as described in Post #198 by @Outlaw525 (diecast collectibles,
transporter and decal) !!
High bidder: $25.00 by @Bb70charger500

Item #31: A set of fender/quarter Road Runner decals by @Darter6 (Post 214) !
High bidder: $

Ed you missed Item #22: 110 dave

davek said:

Ed is not adding FABO auction to the list,it would become a mess.

Click to expand...

Correct, but I'll take the bid on the decals!

YY1 said:

I'll go
$25 on post 197 shifter ball and $20 on post 214 RR decals

Click to expand...

The shifter ball is actually up for bids over on FABO, so I'm not messing with those at all sorry.
HOWEVER, thank you for your bid on the RR DECALS!

Current Auction List:

Item #1: Brewer's trans crossmember donated by @moparedtn (Post #1)
High bidder: $50.00 by @davek

Item #2: Cool vintage oil can donated by @Beekeeper (Post #2) !
High bidder: $25.00 by @Bb70charger500

Item #3: TWO AUCTIONS - Beautiful hand-turned potpourri containers and tops donated by @Red63440 (Post #5) !
High bidder #1: $65.00 by @haywire 440
High bidder #2: $100.00 by @diymirage


Item #4: Brand new USA made big block rocker shafts by @69 Sleeper Bee (Post #12)!
High bidder: $75.00 by @68GTX4SPEED

Item #5: Beautiful refurbished small block valve covers w/breather and PCV from @dadsbee (Post #14 and Post #76) !
High bidder: $80.00 by @Builderguy

Item #6: NICE NOS Superbird wing decal set in black from Jerry @Jerry Hall (Post #17) !
High bidder: $100.00 by @haywire 440

Item #7: Beautiful 1970 NW Territories POLAR BEAR license plate by @Sahara (Post #25) !
High bidder: $1,000.00 by @440+6

Item #8: Mopar P5249712 SB rocker hold downs new in box and Made in USA by @440Coronet500 (Post #33) !
High bidder: $50.00 by @drhill

Item #9: Mopar RB electronic ignition (distributor, orange ECU, coil & harness) used by @Sahara (Post #36) !
High bidder: $125.00 by @68GTX4SPEED

Item #10: NOS Mopar cap, rotor, points and condenser (single points) for the winners' application by @HALIFAXHOPS (Post 44) !
High bidder: $35.00 by @monaco66coupe

Item #11: REALLY nice set of (4) "poverty" Plymouth hubcaps from a 1967 GTX by @dan juhasz (Post #45) !
High bid: $100.00 by @Wojo68

Item #12: NEW IN BOX Holley Street Avenger 770 carburetor by @Woodruff Carbs (Post #50) !!
High bidder: $225.00 by @tmaleck

Item #13: A pair of very nice Mopar-themed license plates by @Darter6 (Post #64) !
High bidder: $150.00 by @Ironbuilt

Item #14: Mopar factory chrome fuel door for Dodge RAMS '09-'18 by @JoePole (Post 62) !
High bidder: $20.00 by @monaco66coupe

Item #15: “Off the Wall” 18" x 24" wall art picture - 3 angles of a ‘68 Hemi Charger RT by @haywire 440 (Post #74 + Post #144) !
High bidder: $25.00 by @Sahara

Item #16: 66/67 blower motor assembly, tested and cleaned by @Durandal25 (Post #80) !
High bidder: $

Item #17: Antron Brown Top Fuel Drivers' Suit by @Darter6 (Post #105) !!!
High bidder: $100.00 by @jmk77379

Item #18: Big Block Oil Pan, freshly painted hemi orange, clean and dry w/baffle by @Ghostrider 67 (Post #110) !
High bidder: $100.00 by @Sahara

Item #19: '65-'66 Plymouth 10" hubcaps by @khryslerkid (Post #111) !
High bidder: $

Item #20: Set of Dodge aluminum Redline hubcaps, nice used by @Part Stalker (Post #112) !
High bidder: $150.00 by @69 Sleeper Bee

Item #21: Nice set of used 3" rear shock plates by @Part Stalker (Post #114) !
High bidder: $50.00 by @coloradohill

Item #22: Unique, very cool P-51 Mustang replica made from beer cans from @sam dupont (Post #117) !
High bidder: $110.00 by @davek

Item #23: NOS '69-'70 Charger rear emblem part number 2902306 by @Part Stalker (Post #143) !
High bidder: $100.00 by @f569

Item #24: Nice pre-owned '67 GTX flip top gas cap and bezel by @Don Frelier (Post #149) !
High bidder: $100.00 by @Beekeeper

Item #25: New CVF 90° billet manifold for a Sanden peanut style AC compressor #7B10 by @Mike67 (Post #163)!
High bidder: $

Item #26: Pre-owned Edelbrock Performer #2101 intake manifold for SBC (winner pays shipping) by @RustyRatRod
(Post #165) Note: Possible previous repair (see Post #199)!
High bidder: $25.00 by @Bb70charger500

Item #27: One set of taillight assemblies for a 1970 Satellite by @NJRR (Post #92) !
High bidder: $

Item #28: Mopar #2841887 Charger emblem, which is believed to be for the 66-70 Charger sail panel by @Part Stalker
(Post #179 for details) !!
High bidder: $40.00 by @Outlaw525

Item #29: Ken Ament Hartford Michigan Chrysler Plymouth license plate topper by @Part Stalker (Post #179)!
High bidder: $

Item #30: The "King Richard" packaged LOT deal as described in Post #198 by @Outlaw525 (diecast collectibles,
transporter and decal) !!
High bidder: $50.00 by @Jerry Hall

Item #31: A set of fender/quarter Road Runner decals by @Darter6 (Post 214) !
High bidder: $20.00 by @YY1

davek said:

Item #22: Unique, very cool P-51 Mustang replica made from beer cans - $110

Click to expand...

Got ya Dave! Thanks!

Jerry Hall said:

Item # 30 $50

Click to expand...

Got it thanks Jerry!

davek said:

Ed you missed Item #22: 110 dave

Click to expand...

Au contrare', mon frere (or something like that).
Look again.

super-bee_ski said:

I will "offer up" Item :
Mopar Factory 426 Hemi intake, slightly modified, (Arlen Vanke Mod)
Factory casting date and the "P" and "S" stamp from the 1969/1970 Era:
View attachment 1158274 View attachment 1158275

Click to expand...

Holy Smokes!!!
VERY cool Item to add to the auction, thanks!

Current Auction List:

Item #1: Brewer's trans crossmember donated by @moparedtn (Post #1)
High bidder: $50.00 by @davek

Item #2: Cool vintage oil can donated by @Beekeeper (Post #2) !
High bidder: $25.00 by @Bb70charger500

Item #3: TWO AUCTIONS - Beautiful hand-turned potpourri containers and tops donated by @Red63440 (Post #5) !
High bidder #1: $65.00 by @haywire 440
High bidder #2: $100.00 by @diymirage


Item #4: Brand new USA made big block rocker shafts by @69 Sleeper Bee (Post #12)!
High bidder: $75.00 by @68GTX4SPEED

Item #5: Beautiful refurbished small block valve covers w/breather and PCV from @dadsbee (Post #14 and Post #76) !
High bidder: $80.00 by @Builderguy

Item #6: NICE NOS Superbird wing decal set in black from Jerry @Jerry Hall (Post #17) !
High bidder: $100.00 by @haywire 440

Item #7: Beautiful 1970 NW Territories POLAR BEAR license plate by @Sahara (Post #25) !
High bidder: $1,000.00 by @440+6

Item #8: Mopar P5249712 SB rocker hold downs new in box and Made in USA by @440Coronet500 (Post #33) !
High bidder: $50.00 by @drhill

Item #9: Mopar RB electronic ignition (distributor, orange ECU, coil & harness) used by @Sahara (Post #36) !
High bidder: $125.00 by @68GTX4SPEED

Item #10: NOS Mopar cap, rotor, points and condenser (single points) for the winners' application by @HALIFAXHOPS (Post 44) !
High bidder: $35.00 by @monaco66coupe

Item #11: REALLY nice set of (4) "poverty" Plymouth hubcaps from a 1967 GTX by @dan juhasz (Post #45) !
High bid: $100.00 by @Wojo68

Item #12: NEW IN BOX Holley Street Avenger 770 carburetor by @Woodruff Carbs (Post #50) !!
High bidder: $225.00 by @tmaleck

Item #13: A pair of very nice Mopar-themed license plates by @Darter6 (Post #64) !
High bidder: $150.00 by @Ironbuilt

Item #14: Mopar factory chrome fuel door for Dodge RAMS '09-'18 by @JoePole (Post 62) !
High bidder: $20.00 by @monaco66coupe

Item #15: “Off the Wall” 18" x 24" wall art picture - 3 angles of a ‘68 Hemi Charger RT by @haywire 440 (Post #74 + Post #144) !
High bidder: $25.00 by @Sahara

Item #16: 66/67 blower motor assembly, tested and cleaned by @Durandal25 (Post #80) !
High bidder: $

Item #17: Antron Brown Top Fuel Drivers' Suit by @Darter6 (Post #105) !!!
High bidder: $100.00 by @jmk77379

Item #18: Big Block Oil Pan, freshly painted hemi orange, clean and dry w/baffle by @Ghostrider 67 (Post #110) !
High bidder: $100.00 by @Sahara

Item #19: '65-'66 Plymouth 10" hubcaps by @khryslerkid (Post #111) !
High bidder: $

Item #20: Set of Dodge aluminum Redline hubcaps, nice used by @Part Stalker (Post #112) !
High bidder: $150.00 by @69 Sleeper Bee

Item #21: Nice set of used 3" rear shock plates by @Part Stalker (Post #114) !
High bidder: $50.00 by @coloradohill

Item #22: Unique, very cool P-51 Mustang replica made from beer cans from @sam dupont (Post #117) !
High bidder: $110.00 by @davek

Item #23: NOS '69-'70 Charger rear emblem part number 2902306 by @Part Stalker (Post #143) !
High bidder: $100.00 by @f569

Item #24: Nice pre-owned '67 GTX flip top gas cap and bezel by @Don Frelier (Post #149) !
High bidder: $100.00 by @Beekeeper

Item #25: New CVF 90° billet manifold for a Sanden peanut style AC compressor #7B10 by @Mike67 (Post #163)!
High bidder: $

Item #26: Pre-owned Edelbrock Performer #2101 intake manifold for SBC (winner pays shipping) by @RustyRatRod
(Post #165) Note: Possible previous repair (see Post #199)!
High bidder: $25.00 by @Bb70charger500

Item #27: One set of taillight assemblies for a 1970 Satellite by @NJRR (Post #92) !
High bidder: $

Item #28: Mopar #2841887 Charger emblem, which is believed to be for the 66-70 Charger sail panel by @Part Stalker
(Post #179 for details) !!
High bidder: $40.00 by @Outlaw525

Item #29: Ken Ament Hartford Michigan Chrysler Plymouth license plate topper by @Part Stalker (Post #179)!
High bidder: $

Item #30: The "King Richard" packaged LOT deal as described in Post #198 by @Outlaw525 (diecast collectibles,
transporter and decal) !!
High bidder: $50.00 by @Jerry Hall

Item #31: A set of fender/quarter Road Runner decals by @Darter6 (Post 214) !
High bidder: $20.00 by @YY1

Item #32: Amazing Mopar Factory 426 Hemi intake, slightly modified, (Arlen Vanke Mod)
by @super-bee_ski (Post #223) !!
High bidder: $100.00 by @Bb70charger500

wow! very cool.

Well I'll start item #32 at $100
Who's gonna steal it?

Bb70charger500 said:

Well I'll start item #32 at $100
Who's gonna steal it?

Click to expand...

Heh, you ain't gonna get it for that methinks - but thanks and duly recorded!

A Big thanks to a Big Heart, moparedtn for setting this up!
And all of you are displaying such compassion for a dear friend who could use some help....

super-bee_ski said:

A Big thanks to a Big Heart, moparedtn for setting this up!
And all of you are displaying such compassion for a dear friend who could use some help....

Click to expand...

I ain't doing nothing but what I should be, sir - but I totally agree with you on the rest of that!
All of YOU are blowing me away with the generosity and outpouring of support for @CudaChick1968 Leanna!!
Heck, I'm just trying not to screw it up.

My bid on Item #32 Hemi Intake $200

Well that was quick

I edited post #74 to show the 18”x24” poster size photos compared to the original 8”x11”.
The poster is for bid and thanks @Sahara for your starting bid.
I’ve been wanting to Supersize this for a long time and now that it’s done I feel it’s impressive, unique and “one of one” so far. The details stand out better from farther away and I’ll have another made up for my new garage/shop that’s presently being built.
Wow, there’s an array of outstanding items in this endeavor and l’m glad to be included.