Looking for around 4 of the threaded stud and nut sets used to secure the trunk panel trim on a Satellite or Belvedere II in 1966 to replace a few of mine that are pretty far gone.
Thank
Thank
WTB 1966 Satellite trunk trim panel fastener hardware
- Thread starter AR67GTX
- Start date
- Status
- Local time
- 4:21 PM
- Joined
- Aug 24, 2015
- Messages
- 858
- Reaction score
- 1,711
- Location
- West Palm Beach, FL
Are they the same as 67? T-shaped head to slide into the track on the panel. I know I have some extra studs. Not sure about nuts.
It’s been so long since I’ve had my trim off my 67 I can’t remember if they are the same. Let me do some research and I’ll see what I can find out.
Thanks
Thanks
I haven’t had much luck. I thought I had an old 67 panel in the attic but I must have gotten rid of it. The 67s from eBay photos have an extruded slot the fasteners slide into. The 66 panel has tabs with a keyhole slot in them. I would think the flat head of the 67 stud heads if no larger than .4 inches would hook into them
OK and I would be willing to give them a try. I have quite a few stamped nuts so that’s no problem
- Local time
- 4:21 PM
- Joined
- Aug 24, 2015
- Messages
- 858
- Reaction score
- 1,711
- Location
- West Palm Beach, FL
I'll take some measurements of what I have. I'll send them to you if they look like they will work
- Local time
- 4:21 PM
- Joined
- Aug 24, 2015
- Messages
- 858
- Reaction score
- 1,711
- Location
- West Palm Beach, FL
T-head is approx. 0.435" x 0.275"
Not sure how well that would work even with some trimming. If they rotate in the process of threading the nut on they might back out. I think I’ll do some more looking and maybe I can find something to work. But thanks for responding and checking those out.
- Status
Similar threads
- Locked
- Locked
- Locked
