2quick
Well-Known Member
Air Dog
My 66 Satellite street car project
- Thread starter 2quick
- Start date
ckessel
Well-Known Member
I have an Air Dog on my 04.5.
2quick
Well-Known Member
Got the front cage section mocked up and welded. Wouldn’t have been able to get all the way around the tube in the car anyway. Added The rear view mirror bracket and front window net mount. 80 grit DA on the tubing then a coat of epoxy primer. Going to try and arch the existing roll bar black with some different %’s of flattener till it’s close then spray it out.
2quick
Well-Known Member
Updates, updates, updates! Lots been done over the past couple months. If I would have realized how much work this was going to be I probably wouldn’t have done it. But here we are.
Got the cage mocked up and tacked in place. Because I can’t TIG weld for **** I sent it out to Xtreme racing engines in Newton NJ to have it all welded in.
Got the cage mocked up and tacked in place. Because I can’t TIG weld for **** I sent it out to Xtreme racing engines in Newton NJ to have it all welded in.
2quick
Well-Known Member
Pull the whole thing back out and painted what I could not be able to get to once installed.
2quick
Well-Known Member
Had the window net made and figured out the brackets. I used removable rods on both ends so could take it all the way out when the swing out bars are removed. I don’t drive the car around town with the bars in.
2quick
Well-Known Member
Sent the car to have the whole thing welded.
2quick
Well-Known Member
What a nightmare to paint it. Wrapped the whole car inside and out. Sanded the entire thing down with 320 grit. Epoxy primer then black base and satin clear.
2quick
Well-Known Member
Unwrapped it, installed new carpet.
2quick
Well-Known Member
Finished off the center console, new motion race works air shifter. All controlled from Holley ECU. Installed back seat.
2quick
Well-Known Member
Repaired the damage to bottom of car when welding in floor plates.
Belvedere408
Well-Known Member
- Local time
- 3:33 PM
- Joined
- Jan 25, 2023
- Messages
- 541
- Reaction score
- 1,094
- Location
- Springfield Oregon
Looks awesome lots of dedication.
ckessel
Well-Known Member
Multiple hours of masking then 15 minutes to remove. But gotta do it. Looks awesome!
Similar threads
