• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Baby Come Back; '70 Charger Restoration

Dave here is a picture of the taillight panel. Hopefully you can blow the picture up and be able to align the template accordingly. You might have to cut the template in the taillight area so you can move it up or down to align the holes as needed.

20221008_135517.jpg
 
The holes in the taillight panel are approximately 3/8 of an inch from the edge of the taillight opening on the bottom, and approximately 1/4 inch from the taillight opening above on the top of the taillight opening. The measurements are to the center of the holes.

20250918_063235.jpg


20250918_063248.jpg


20250918_063253.jpg


20250918_063259.jpg


20250918_063307.jpg
 
See that junk on her trunk, it's just a Daytona front spoiler and a rare factory sunroof door panel.....nothing to see here.

20250918_063349.jpg
 
Auto Transport Service
Back
Top