x2 what ever it takes. 
`70 road runner, FC7, 383, 727 It`s waited long enough, finally time to get it done.
- Thread starter torredcuda
- Start date
torredcuda
Well-Known Member
Nine days till the two kids are back in school and I can get some more garage time! 
Should be last skim coat of mud, once dry and sanded down i can get epoxy on the upper cowl area. Next up is to finish the outer front fender well areas and engine bay.
Should be last skim coat of mud, once dry and sanded down i can get epoxy on the upper cowl area. Next up is to finish the outer front fender well areas and engine bay.
torredcuda
Well-Known Member
Sprayed the epoxy today.
torredcuda
Well-Known Member
The super fun, glamorous job of stripping and sanding the firewall with grinder, DA and fingers.
Belvedere408
Well-Known Member
- Local time
- 11:46 AM
- Joined
- Jan 25, 2023
- Messages
- 657
- Reaction score
- 1,336
- Location
- Springfield Oregon
Looks good the hard work and time consuming pays off in the end
torredcuda
Well-Known Member
Sprayed the engine bay with epoxy and high build primers.
Looks great!
torredcuda
Well-Known Member
Stripping and sanding the door jambs and rocker panels, couple small dents and some surface rust but nice and solid.
torredcuda
Well-Known Member
Before I start spraying epoxy I wanted to go back and weld in the wire covers that I didn't do while welding in the floor pan. Drivers side is done but ran out of time today to do the passenger ones. Hopefully have the jambs, rockers and floor in primer this weekend.
Similar threads
