Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
...Hanger Set. Mounted, then I realized I ordered the wrong set.
Fits - 1966-70 Plymouth B body with stock length 22” front segment springs.
Item - MREAR095
Price - $60 plus shipping.
Location - Houlton, Wi.
**Can’t return. Ordered these well over a year ago while I was restoring my car**
Hi,
I'm looking for a deck lid for my 1968 Coronet that is in good, to great condition. I currently have a fiberglass replacement which fits well, but I would like to use it as a back up.
Shipping must be an option, unless you're within driving distance (6hrs) of the Twin Cities (Mn)...
Anyone looking for a pair of lower control arms with pivot shafts and torsion bar adjuster bolts?
I removed the old sleeves, gave it a quick sandblast and sprayed them with some primer so they wouldn’t flash rust, but they should be thoroughly cleaned.
These do not have the sway bar tabs...
...being rebuilt, so I don't have access to either at this time. But to get brackets and linkage aligned properly, does the transmission have to be in place?
**my main concern is the shaft coming through the floor, but I believe the boot will allow for a little wiggle room?**
Thanks in advance...
Hi,
I’m converting my 68 Coronet from a column shift to a console and I’m in need necessary linkages, shifter, and brackets to make this happen.
Pictures below are for a 69, but I’m including them as a reference.
Thanks
Car - 1968 Coronet 2dr Hardtop
Engine - Was a 318, but being replaced with a 440.
Does anyone sell these conversion brackets anymore? https://www.engine-swaps.com/Pages/ProductsType/EngConvKits.html
Any help with a source would be appreciated.
I’m looking for a set of A pillar moldings for my 1968 Coronet, 2dr Hardtop. Black preferred, but will consider other colors as I’ll need to spray some other pieces.
Thanks
Long story short, I received a call from my engine builder yesterday stating he found a significant crack by one of the frost plugs during the tear down/tanking of the motor. I talked with a family member who repairs blocks, and he said it could be fixed, but I’ve lost confidence in the motor...
This is one of the nicest hoods I’ve seen in a while, but I no longer need it. Couple of scratches, and a small dent.
$350
Note - This can be used on a ‘69.
Located in Houlton, Wi.
I recently had full AMD quarters put on my 1968 Coronet, but ran into a slight issue that I would like some input on.
The quarter extensions align perfect with the topline, trunk and bottom corners. But my issue lies with the quarter/extension where it starts to curve slightly above the side...