Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 14 inch unsilenced air cleaner that I no longer need. I believe these were used on 340, 383 and 440 engines in 68 and 69. It's in excellent condition. I don't have a pie tin for it. I want $275 for it and I'll pay shipping to the lower 48 states.
When looking for friction modifier for my clutch type sure grip I found 3 different Mopar ones. 4318060 AB, 4318060 AC and AN 4315060 AD. Does anyone know which I should use?
Also, the gear grease (Valvoline 75w-90) I'm using is fully synthetic and contains friction modifier. Do I even need to...
My brother has a MSD distributor on his 440. He is currently getting spark from his distributor but none to the spark plugs. Does anyone have any idea what the problem could be? It was working fine last summer.
I'm in the process of changing the discs in my clutch type sure grip rear end. I purchased gear oil that contains friction modifier. Do I still need to apply friction modifier to the discs before assembly?
I recently purchased a Powr-Lok clutch pack for my 8 3/4 rear end from Doctor Diff. When I received it it had 4 flat clutch discs, 4 flat plates and 2 curved plates. The service manual calls for 2 flat discs and 2 curved ones. My sure grip has 2 flat and 2 dished discs. Does anyone know if the...
What is the proper torque for the pinion nut on an 8 3/4 rear end with the 741carrier? It said 40 ft-lb in one reference book and it seems to me that it should be closer to 240 ft-lbs.
I've seen both one piece pinion thrust spacers and 3-piece ones. Does it matter which I use in my 741 housing with clutch type sure grip? I don't have green bearings.
I have a Black steering wheel, complete with horn ring and emblem, for sale. I think it will work on 67-69 a, b, or c body Mopars. I'm asking $275 plus shipping for it. It is located in central Illinois (zip code 61548). It is in very good condition with very little pitting of the chrome. You...
Has anyone installed a Lokar kick down cable on a Thermoquad carb? Since the Lokar works backward compared to the normal kick down some modifications have to be made to the carb.
Is there a kit for that? How about if I switch to a Holly double pumper?
I'm considering buying a 727 transmission that originally was in a truck with a 383. I want to use it in my 66 Satellite that has a 440. Does anyone know what the difference between the truck and car transmissions?
My 66 Satellite had heat/AC mounted to the package tray. It was dealer installed when the car was new. Has anyone else seen this? Any idea what it's worth? Here are pictures of mine.
I'm looking for what I call the 3 piece kickdown linkage for my 66 Satellite with a 440.
I need all the pieces including the pivot on the transmission.
Any ideas on how to keep a 440 from turning when torquing the damper bolt? The engine is in the car and it has a 727. Would it be ok to use a piston stop that screws into the spark plug hole?