Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
O
ber: 9840"]Can you give more information about when it occurs?
The general rule is that drivetrain vibration will happen while driving, maybe at a specific RPM band, and I think Engine vibrations should happen when the car is not moving. Drivetrain vibration can be further tested under load...
As our 67 gtx 4speed build continues, it's clear that our rear gear is way to low, for our 477, dual quad stroker. Our friend wants it, he's provided many parts for this build, w/o his help don't know if we could have ever got this far. It's got mosier axels. curios about value. Also, what would...
thanks to all, we changed from a fram to a wix filter and presto! 78 lbs. at upper rev range about 30 at idle. hard to believe a five dollar filter could destroy a motor worth thousands. thanks again. now if it will just the way it is
well thanks to everyone who have helped us get this car this far along. Kevin is finally driving his car. on his first run of 40 miles he noticed his oil pressure at idle dropped to zero (good eye son). still has 65 lbs at higher rpms. we built it with a melling oil pump. 477 bb stroker , dual...
cranky, its only got about 100 miles on it but that's probably good advice. 747 mopar, we would like to do the same thing, would upgrading to solids require another set of pushrods?
lew we have flat tappet hyd, not a roller cam, we did just put on roller rockers, and just had smith bros. make our push rods. I just found the box the lifters came in...comp pro mag 867-16. thanks on hold with them now, may just order the lunatis
- - - Updated - - -
comp said they may just...
benno, was afraid I had heard that, guy at comp did say "they may have failed" I may try to give them a full turn of preload...Oh well...thx...Bob
- - - Updated - - -
wonder if I will need to have another set of push rods cut if I change lifters
not sure what the problem is. different ones seem to leak down. motor still has break-in oil in it, after I installed roller rockers the upper valve train seemed noisy, pulled the valve cover, lifter not pumped up, ran it a while, pulled the valve cover, the aforementioned lifter was good, but...
wanted to say a special thanks to all you guys, roller rockers and new smith bros. push rods are in and it sounds wicked! haven't driven it yet, waiting for throttle linkage clamp. dual quads seem sweet as well! I did pull one spark plug after running it for a couple of minutes, looked pretty...
Thanks to all you guys. after a little machining got the 10 degree bushing in, and the light springs. when I put my timing light on it where should I set it initially. thx, Bob