Search results for query: *

I don't know if you're still looking but I have a complete set of these moldings. Some of the pieces are quite rough but can be straightened and polished by someone with a lot more experience and patience than I have.

Bad morning. I meant Thermoquad not Quadrajet.

I thought it would be relative easy to find but I'm looking for an idle solenoid bracket for 72 400 quadrajet application. I would imagine other years would work as well but I'm unable to confirm that. Can anyone help?

All I need is one tab for an otherwise great condition center vent. Can anyone help me out.

After an exhaustive search I finally found a picture from the 72 Chrysler Parts Catalog that shows the filter before the pump for 340 applications.

I understand what you are saying but it is 318 with a single preformed line going from the pump to carburator. Looking at Classic Industries they offer a one piece line for 71/72 318, a two piece line for 71 340 and a one piece line for 72 340. This adds to my confusion.

I know this has been discussed at great length but I still can't find a definitive answer as to why mopar put the fuel filter before the pump on my 72 Satellite. I know the conventional wisdom is to install it after the pump but mopar must have had some reason to install it before. Does anyone...

Can anyone help me identify these springs. They have 5 1/2 leaves. Part number 2835155.

Thanks, that's basically what I was thinking. I just wanted to get opinions before I did something stupid and damaged them beyond repair. Also do you have a suggestion as to which epoxy to use?

Sorry if this has been addressed before but I've searched extensively and can't find anything about it. I have a 1972 Satellite Sebring Plus with the optional rubber bumper guards. I'm starting to restore the car and have decided I want to keep the guards. The rear ones are in good condition...

I just found this thread. Do you still have kickdown linkages? I'm looking for the "one piece" link for 340/727 combination. Part was used on 72-74 B and E bodies with 340/727 and 74 360/727.

I'm still looking for this part.

I'm looking for the correct one piece kickdown linkage for my 72 Satellite with 340/727 combination. My research say this was installed on 72-74 340 or 360 engines with 4BBL carburetor. Chrysler part number is 3577559.

Thanks for the reply but the pieces I need are unique to the 72 Satellite Sebring and Sebring Plus.

I found the door piece but am still looking for the left rear quarter panel piece.

I'm still looking for this moulding. Anybody???

Unfortunately the left and right door pieces are different. The front end is beveled to clear the fender when the door is opened. PM sent

I need the left rear quarter panel moulding but am also interested in the the RH door piece as well.

I just bought a 72 Sebring Plus with this trim option. It has all the pieces except the left rear quarter panel so I'm looking as well. Anybody have one? The restoration will begin soon.