Search results for query: *

Can anyone here tell me which underhood areas were shot with Organisol on a 74 Charger hatdtop? I'll assume front of rad support, but did the whole top of the cowl and undeside of hood receive this treatmemt? I do not have the assembly manual to show the locations.

I installed a Moog idler arm to replace the blown out original on my 72 Charger. Torque spec per shop manual is 65 lbft, but if i tighten it anywhere beyond 20 lbft, the arm gets tight in the housing and wont move freely. The Moog design is not like the original (surprise, surprise) in that it...

My retainer ring on my 72 Charger broke and the one on my 74 is completely missing. I tried researching for one on the net but got back every result except what i was looking for. Does anyone here know where i can get this retainer that holds the drain tube in place? Thanks.

Were the front anti-sway bars natural metal or painted black?

Has anyone here attempted to repair the pins that mount the metal frame to the lens? I figured i'd ask for help before i make my gorilla attempt. Also have a crack in one of the housings...any tips on repairing?

72 Charger bumper emblem. The red and black look flat but i don't know if it's because of oxidation. I want to repaint it in the correct factory colors. Are these flat, semi-gloss, or gloss? And what's the best choice for the red? thanks

Got a Chinese made Four Seasons receiver/drier for my 72 Charger because the picture in the ad looked like my original. Well a picture is worth a thousand curse words because it doesn't match. No provision for the harness plug in and no sight glass. Are there rx/driers out there that are...

Can anyone confirm the correct (non locking) gas cap on both a 72 and 74 Charger? I'm planning on purchasing these but the catalogs show an unexpected range of items. The one on my 74 looks like a red shop rag which i assume may be factory if built on a Friday. The one on my 72 is pictured...

Can anybody tell me how this goes back on. I took pics but not enough (you can never have enough pics). What has me puzzled is the bend in the stalk which prevents it from sitting flush on the booster. Now i coulda sworn at least one nut secured the stalk on the front side (so the wiring...

Does anyone know what goes inside this cup? When i took it apart, it was crumbling. Felt like it might have been open cell polyurethane foam.

Does anybody know how to remove the pigtail from the housing without destroying it? I have a good housing with a bad pigtail and a broken housing with a good pigtail.

I have what i think is a replacement motor on my 72 Charger SE. It's painted silver. I thought these were black. I'm going for the original look. What color were they from the factory? Thanks.

Anybody know how to repair these? More specifically...has anyone here disassembled one? Was hoping to simply oil it and get it working again, but like a good car guy, i created more work for myself by breaking the seconds hand trying to disassemble.