Search results for query: *

I believe that attaches to the upper shoulder belt bolt bracket on 68’s and maybe later. Could be all wrong.

That's why I posted it... information is key, more the better when it comes to scams

Hello and happy Friday. Can someone please tell me what this is and where do it go?? Thanks, Mikey

Co2 is very reliable. I redid parts of the wiring and screwed something up.

From Mopar Connection. Finders Keepers: Cole Quintin's 10,000 Mile 1970 Plymouth Hemi 'Cuda - Mopar Connection Magazine | A comprehensive daily resource for Mopar enthusiast news, features and the latest Mopar tech

Or you can try one of these, an old rusty, long shank, mag wheel lug nut. This one is smashed flat on top. I've been using this method since the 80's, especially when the parts are off the car. I had a couple coffee cans full of old rusty takeoffs, they come 7/16", 1/2", and 9/16" for...

Went out for the first week of deer season. My buddy's son missed a big buck opening morning. He's 35 and has never missed a shot. One of life's lessons. On day 4 I had success! Of course it was chantrelles again. Ya takes what ya gets.

I bought this a few minutes ago. I will manually toggle switch from my old DC controller to this DCC.

Looks very encouraging. Must have lots of time and engineering in a car that runs that quick. Why a C02 shifter. I don't understad putting in a system that can fail in so many ways.

Rest in peace Mike Landy. Condolences to family and friends. Kim

to see if it's the Borgeson box itself or the pump (which may have worn out due to the Borgeson), have the car running and place a tire iron contacting the box while you lower your ear close to the upper end of the tire iron. Then have an assistant turn the steering wheel to confirm if the noise...

The following image shows the diagram of the mounting, which still uses an upper stud plate like the 1970 and 1971 cars, from the Chrysler parts catalog:

1960 Plymouth Fury Convertible Sonoramic Commando Badges

From Ahole Intel A car's glove box is called that because it was originally designed to store driving gloves. In early automobiles, gloves were essential for drivers to keep their hands warm in open-air vehicles without heaters and to protect them from vibrations and potential "kick backs" from...

Got some 71-72 B Body Rallye Dash questions. My car was originally equiped with the standard dash so I don't have an original rallye harness to look at. I bought the new harness form YearOne. 1) Does the Blue wire W/ white stripe (A) plug into the 12 V supply to the Voltage drop (B)? This wire...

yes i couldn't find anything in the service manual. But did find some info. its part of an A01 option with map light an interior lights with a time delay for the lights to go off like 5 seconds after the door is shut. I found in the old harness, the harness and connectors

Ace played his last show here in Providence about a week or so ago, according to the radio.

Thanks for your help ! Much appreciated. I'll see what I can find with those parts numbers!

Never heard of him until just now. Thanks, though, for the post...cr8crshr/Bill:praying::praying::praying::usflag::usflag::usflag:

Next time, try one of these: