Ignition key light power source

[Stucat]

So I have put my whole dash back together on a stand I made. Can't find the power source for the yellow wire ( 3" long ) that operates light above the ignition switch. Looked on the wiring chart I have for a 69 Charger 500, R/T and SE. Am I blind? Also the wiring harness for the 4 speed console is that just the the red and pink wire harness? Thanks

 

[gkent]

Hmmm - doesn't it plug into pink somewhere.

 

[MWbirdLOVER70]

So I have put my whole dash back together on a stand I made. Can't find the power source for the yellow wire ( 3" long ) that operates light above the ignition switch. Looked on the wiring chart I have for a 69 Charger 500, R/T and SE. Am I blind? Also the wiring harness for the 4 speed console is that just the the red and pink wire harness? Thanks

I have a pic somewhere but doesn’t it go into time delay canister

 

[MWbirdLOVER70]

 

[pnora]

You need to have the light package option to have the harness. It does not plug into the stock dash harness.

 

[Stucat]

Have nothing like that. The dash had the light attached to the ignition when I took it apart during the restoration. I got the car like 15 years ago with no drive train and dash harness's. Thanks will have to look into that to c what else I am missing.

 

[PurpleBeeper]

View attachment 1933057

Sorry to hijack

View attachment 1933057

sorry to hijack. I’m doing the same wiring on a ‘70 with the A01 light package. Can you please describe what each wire is or where it goes?
1. Blue light on single yellow - is that the key or ash tray light?
2. Long yellow wire all alone = ?
3. Yellow wire with “L” connector = ?
4. Yellow wire with straight connector = ?
5. Clear bulb = ?
6. Pink wire - where does it connect?
THANK YOU!!

 

[MWbirdLOVER70]

Sorry to hijack

sorry to hijack. I’m doing the same wiring on a ‘70 with the A01 light package. Can you please describe what each wire is or where it goes?
1. Blue light on single yellow - is that the key or ash tray light?
2. Long yellow wire all alone = ?
3. Yellow wire with “L” connector = ?
4. Yellow wire with straight connector = ?
5. Clear bulb = ?
6. Pink wire - where does it connect?
THANK YOU!!

DM sent

 

[MWbirdLOVER70]

Inbox full. Might be easier to download FSM if others don’t chime in. 70 kinda a harness by itself but can figure out with FSM or DM me if you want

 

[Bird 426]

If you don't find or sort it out. My Road Runner dash is still pretty accessible. I'm busy, but can take a look in a day or so. Only light that I do not have is an ash tray light. Everything works as it should.

 

[PurpleBeeper]

Inbox full. Might be easier to download FSM if others don’t chime in. 70 kinda a harness by itself but can figure out with FSM or DM me if you want

The factory service manual isn’t very clear in this circuit vs what I see in my car. I appreciate your help

 

[pnora]

The factory service manual isn’t very clear in this circuit vs what I see in my car. I appreciate your help

You should start your own post on what your problems are. To much cross fire when high jacking a post. FSM has most of what you need to see. 70 has different wiring vs 68-69 models.

 

[MWbirdLOVER70]

Examples of differences I’ve seen personally are map light has a plug in the glove box above liner, door jam switches incorporated in this circuit, pink wire goes to back of fuse box on pink circuit I believe is there time delay you’ll have to look 70 key light incorporated on steering column hence the time delay canister ( silver canister in pic of 68-69 )

 

[Stucat]

yes i couldn't find anything in the service manual. But did find some info. its part of an A01 option with map light an interior lights with a time delay for the lights to go off like 5 seconds after the door is shut. I found in the old harness, the harness and connectors