Search results for query: *

Yes, I will check with my customer and pass on your info

Thanks for the help. I like the CIGAR lighter in the diagram. C back in 69 even Mother Mopar new cigarettes where bad for us.

yes i couldn't find anything in the service manual. But did find some info. its part of an A01 option with map light an interior lights with a time delay for the lights to go off like 5 seconds after the door is shut. I found in the old harness, the harness and connectors

The floor was replace by the previous owner console looks to high in the rear. Does anyone know the hight of the console from the hump? Thanks

Have nothing like that. The dash had the light attached to the ignition when I took it apart during the restoration. I got the car like 15 years ago with no drive train and dash harness's. Thanks will have to look into that to c what else I am missing.

So I have put my whole dash back together on a stand I made. Can't find the power source for the yellow wire ( 3" long ) that operates light above the ignition switch. Looked on the wiring chart I have for a 69 Charger 500, R/T and SE. Am I blind? Also the wiring harness for the 4 speed console...

So I have put my whole dash back together on a stand I made. Can't find the power source for the yellow wire ( 3" long ) that operates light above the ignition switch. Looked on the wiring chart I have for a 69 Charger 500, R/T and SE. Am I blind? Also the wiring harness for the 4 speed console...

Good morning The inner front bearing size A2 all years? The Big bearing on 73 up A13 or A 17? A17 is a bigger bearing? So A13 would be 72 and down?

My 69 Charger rear window main track roller guild rollers don't roll at all. does anyone know how to take apart and restore? Do you have to drill out the rivets that hold the spring clip on to dis assemble them? Thanks

Thanks will try that

Does anyone have ? or a picture of what a 69 b body 3 speed wiper harness looks like? Would be great to see what I am looking for. Thanks

Looking for a 69 b body 3 speed wirper harness? Thanks any leads would be great

actually they where already drilled ouT, but no stiffener there. Allset

Thanks thats what I needed

Sorry I guess that would be nice to know. its a 69 Charger

Putting a 4 speed in an auto Charger. Anyone have a pic or information where that 4 speed firewall stiffener brkt goes? Thanks

Doing a restoration

Do a restoration on a 69 Charger, Put the non a/c heater box in. Need to get new wiring harness. All I could find for Classic Inds, M&H and OER where harness that say A/C & heater harness engine side and A/C & Heater harness dash side. Couldn't fine harness for a non A/c setup. Any Help would...

Anyone know where I can buy a set of rear axel bump stops that mount to the frame for a 69 b body? Thanks

looking for info for the splash shields on a Daytona? Those would be for 70 charger fender's correct