Search results for query: *

68 Charger…new Tanks Inc EFI tank and assembly. I have a returnless system. There is a vent nipple on the pump mounting plate, another vent nipple on top of tank itself. Tanks Inc says i can cap both the return nipple & vent nipple on the pump mounting plate, but run a hose to rollover...

Bought new fuel tank, and new fuel filler tube grommet. I purchased the “taller” version grommet…see pic. Of course no instructions, so which end goes in the tank?

68 Charger, stock fuel tank. The shape is the back if the tank (rear of car) is shallow, then becomes deeper towards the front of the car. Yet, when you install a factory fuel sending unit, it goes straight in (towards the back) and the fuel pickup is in the back? Why would it not go into the...

On a 68 Charger with RETURNLESS EFI? Not a fan of putting this pump back in the tank, but cannot find a place to mount externally and be at or below the lowest point of the fuel tank :BangHead:

Any suggestions for the best gas proof sealant to use for wires running into fuel tank for in-tank pump?

68 Charger…. On internet couldn’t find a video exclusively for tank removal on a 68Charger… anyone have a step by step sequence in order to remove the tank? Im sure the filler tube is involved? Thanks

Lots of fuel fumes in the garage….no leaks anywhere that Ive found. Brand new tank with hose vapor line from top of filler neck down thru trunk floor into the frame…. ( i think thats correct?)

After the fuel filler tube and new fuel tank got installed, I noticed there’s a nipple near the top of the filler tube, and another, on the fuel tank next to the actual fuel line…see pics. Researching this vent line, saw one from Classic Ind for $20+ shipping, others were closer to $50. Can this...

Getting ready to install six pack intake....any intake gaskets better than others? is there any need for gasket cement/sealer?

I plan some engine compartment bling, and wanted to hear from anyone with experience on which coating to go with for a similar to chrome look?

I’ve heard there are options for 440 six pack that are fuel injection? Anyone recommend a “simple installation “ one?

Installed a new fuel sender about a month ago, went pretty well, but never really filled the tank to the top....decided to take long cruise today, so last night filled gas tank to the top, about mile away from my house. Drive home, no issues....(was expecting a leak from the sender gasket with...

After long searches here, lots of info regarding changing fuel senders, but I'm looking for a step by step how to remove the fuel tank and sender? (69 RR) I assume removing tank would be much easier than trying to change sender in the car? Thanks

Car runs fine (once warmed up), theres no choke....after a ride, pull into the garage, and shut off, continuously smell raw fuel? NO leaks anywhere, but the smell is strong for an hour or so after shutting off? Is carb messed up? Demons any good? Is the Edelbroch manifold an issue? Thanks as...