Search results for query: *

What is a good shade of black and brand for ramcharger duct work? Satin, flat, or semi flat Used Eastwood under hood black satin for brackets etc. But thinking a little too glossy. Any help appreciated! Thank you in advance

What is correct bolt setup for 69 Coronet bucket seat hinge ? Top pic has 5/8 shoulder and bottom is 1/2 the 5/8 are marked with a N and no markings on 1/2 “ Also any other washers besides the repo fiber ones from classic ind. Between hinge and seat? Thank in advance dcmason69

What is correct color for 69 R/T Coronet park lamp lens/shroud ? All silver or silver inside and black outside? I have one of each plcked up at meet! Thanks in advance dcmason69

Looking for proper routing path for neutral/park - reverse lamp harness on my 69 Coronet! Down firewall and follow along top of Tranny ? Or over booster down apron and along Speedo cable? Auto/power brakes Thank you dcmason69

This question is directed to dadsbee A while back I saw a thread that you used aVHT roll bar and chassis black for your cleaner base Was that a satin or gloss ? Thanks in advance dcmason69

What is too high battery for a 69 Coronet N96 hood? Can a person use a 8 inch tall battery and be ok? Looking to put a AGM in

Any one have a source for the correct size washer squiter hose for 69 Coronet? Measures about 1/8 Id. 7/32 Od. Thin wall. Thank you dcmason69

The nozzle hose across cowl has 2 holdown clips do they both point back or the right side foward and left side back ? What is right dadsbee? Thank You dcmason69

Restoring rear license plate bracket on 69 Coronet, what did these look like from factory as far as paint or plating? Had to take mine apart from the pivot pin and spring in order to straighten both pieces has old black paint on back side but I don’t believe it’s correct! Any help...

What’s a good quality upper and lower Rubber bushing? Iam thinking it’s probably a crap shoot anymore, mostly all manufactured over seas ! What have you guys used that you had the best fit and quality ? MOOG. FROFORGE MASTER PRO MOV0tech AC DELCO and the list goes on. Thank you...

Painting 69 440 engine Hemi Orange does dip stick tube get orange also? also handle on stick? What is factory correct?

Any one seen or know about angle pad valve covers ? What engine and year used? Any info? dcmason69

Can any one tell me the difference between a repo 7 blade clutch fan and factory? 2863216 do the factory have 2863216 stamped on all the blades? I see another stamp # on flat near the big hole at hub looks like 46237 with a small pentastar above it I am hoping that this is a factory fan...

Adding a N96 hood to 69 Coronet with power disc. do I need to be concerned with Ramcharger duct clearance, or is that only on cars with HEmi engines that there was a special shape to the left hand duct ? I have the regular 440 ramcharger duct work now. thank you dcmason69

Need 7 blade clutch fan Do I get new Chinese or Go orig? Are the 6 blade Derale fans work as good as 7 blade 2863216 is Mopar # are the ones from Mancini Chinese? Thanks

Had my cluster rebuilt by Auto Instruments it came back with out the capacitor that runs to the hot side of voltage limiter. When I asked them why it was omitted they say that it is not needed with a electronic voltage limiter, its only function is to eliminate radio noise when used with a...

Can anyone recommend a booster rebuilder? Is Ram man still good? seen some reviews that have me concerned. dcmason69

Has anyone had any dealings with reproduction upper wood grain mouldings on a 69 Coronet door panel? I am considering adding these to my door panels I just got from Legendary, I am on the fence on wheather to get repo ones or try getting original good used ones? my main concern is the mounting...

Looking to get Bumper done, where is a reputable place ? will need minor dent repair and plating. Appreciate any help dcmason69

Getting ready to have my gauge cluster done, have found several places to do this but some will use the vinyl overlays and some will silkscreen. I know that it is my car so i can do what I want but would like some advice on what looks the best and will stand up. I have a 69 Coronet rally dash...