Search results for query: *

Chillin with the kids. Cuda[ 18 on the way to 19] sucking up heat from my lap, Toga and Zeke on guard duty.

Happy Birthday!

YEA! No more beer spilling. Thank you Joey!

Make sure there is a baffle of some sort on the rocker side of those covers. Otherwise the valve will enable the oil to get sucked out.

Earlier this morning I checked out Edelbrocks site for filter units. A friend of mine is having the same fitment issues on his Charger. Has to use a spacer otherwise the base hits the choke. Anyway, looking at the #1221 unit, the base still looks like it's formed for the center feed Holley's...

I saw "rubber shortage" and it made me wonder if some sailors just got back from a year plus deployment.:lol:

On mine, I plan on doing a pigtail harness of sorts. No way to connect anything when it gets in the car with the headers on too.

I'm using a Powermaster 9523 for my 65. On the 65, it has a 500" Indy low deck aluminum wedge which has a bit wider block. I tried a Dakota starter but that was a for sure no go. The 9523 is clockable with 4 positions. I tried all 4 and got the best all around on the 3rd spot I believe. It had...

I have a 67 wagon w/440 out here. We've got E15 and so far it's not bad. When I do get into warmer areas, there is some percolation, but it hasn't been a massive issue. The car has just a standard oe style pump on it. Down the road I want to do multi point efi. I would put a better after pump...

Pacific Graft and Extortion. Pigs Goats and Elephants.

I like that!

Maybe @mobileparts

Shoveling sunshine here.

Happy Birthday.

Yes. Early ones, mid 60's and back I think, were 4 7/32". Don't remember when they went to 5 1/8". I wanted to put an AFB/AVS on the wagon, 67, but could not get the right base for it. As it sits right now, there is 1/2-3/4" of clearance with what I have. Performer RPM also. Regular Performer is...

I'd get some new or donor rails.

The drop base you need looks like it was formed over a huge Bagel. That will fit Q-jets, TQ's, AFB's/AVS's, Holley's. Most likely the one you're speaking of is like mine which only fits dual feed Holley's due to its contours. Other carb's need a spacer between it and the carb. In the first...

Like so.

I've been working on the "new" column for the 72. Installed the hybrid coupler from BAC, cleaned it up, wiped it down with wax and grease remover, hit it with scotchbrite, feathered out the visible chips, hit those areas with some 320, wiped it down again, shot it with some SEM Trim Black for...

Or Red Head in Washington state. Big no on the parts stores and many "restoration parts" outlets. Lifetime warranty doesn't mean poo when you have to keep replacing it for various reasons. Lares does make new boxes too. Put one on my 67 wagon. Direct fit and will clear oe exhaust. If you have...