Search results for query: *

I have a tci 141503 convertor in my 73 360 charger that I believe have gone bad,I can head it knocking when idling.It is no longer sold so I want to know what is the stall speed on it and is the tci 141500 the same but need the flex plate to balance the engine. small Edbrock 280-280 cam.

I have a 73 dodge charger that runs good looks good, but the steering is bad, I replaced the steering gear that was leaking, that helped some, but the car is nothing like any of my other cars, for one the car is a big car and I have to keep my mind on this car because it just seems to drift on...

I have a 73 charger with a 360 in it and It has a bad vibration sitting still at 2000 rpms and while driving at 70 mph. I have checked convertor to make sure weights are still on converter removed bolts from converter and hear some noise when I rotate it,can also hear a light noise while it is...

I have a 73 charger that is a really nice car to have, I get a lot of thumbs up when I drive it. I love the car but it handles bad, I have all new steering parts,It have been this way every since I bought it 30 years ago, when I drive It I have to keep my mind on keeping it in the road, I have...

I have a 360 engine in my 73 charger and I want to install timing tape to set total timing, how do you install it and how do you read it I know it have a timing tab on the chain cover but I want to set total timing.

I have a 73 dodge charger I need to know what is the correct degree of the driveshaft using a angle degree tool need to know if the driveshaft angle is correct, have a small vibration in the car at high speed, have balanced all tires all new parts on the front end.

I have a 73 charger that have a bad vibration at about 6o mph I have replaced rear tires after being told by two places that one of my rear tires had a flat spot on it, when I say a vibration I really mean a vibration that can be felt more when you get off the gas,I have what looks like some...

I have been thinking about getting a fuel injection setup for my 73 360 engine charger.I think I'll be getting a Holley kit if I get one. Have anyone installed one on their mopar and if so what do you think of it?

I have a 73 charger with a 360 engine bored 30 over with stock pistons rpm intake edelbrock heads with a crane 272 cam edelbrock rpm intake 750 vac. holley carb,hooker headers and 2.5 exhaust ,with 323 gears and a tci trans, with a 2000 stall. car runs great but there is no get up and go coming...

Every since I have owned my 73 charger which is 28yrs I have had to deal with bad head lighting. I can't say let's see at night. I have replaced the bulbs with so called brighter bulbs but still no better, is there a cure for this problem? am I the only one that has this problem? HELP.

I am looking for a retaining nut that holds the light switch on. I have tried every where I can think of and no one seems to make them, only ones I have found was for 63-64 or for a 71.it seems as if the 71-73 chargers just gets no respect when it comes to aftermarket parts.can anyone help me...

I have a 73 charger with a 727 trans and it have a leak at the tail of it, no leaks anywhere else it have been doing it for about a year.it leaks going down the road and sitting still over night.I have checked all over it and can't find any out side leaks,what can cause this ? I am going to...

I started removing my dash so that I can send it off to be repaired. got it just about out but the wiring going to all the lights and gauges seems to be a problem what do I do to get it all the way out? Is there a main plug or do I have to try to tag each wire which is going to be hard to do. I...

Trying to find a GOOD rust free hood for my 73 charger, don't want a fiberglass one but that's all that I can seem to fine, to me the glass ones never seem to lay right. can anyone help me fine a good hood. if fiberglass a good one.

I have a 73 charger that is in need of the gas gauge repaired or replace. I have replaced the tank sending unit twice so I don't think it's the sender. the hand was going to full if you added 5 gallons to the tank. Now the hand sits in the empty location and jumps back and forward. I don't know...

Need horn and buzzer relay for my 73 charger,can anyone tell me where I can find one?

can someone tell me the correct torque number for my 73 charger k member bolts, I will be thankful for the infro.

I have a 73 mopar 440 block that have never been bored, I had planed to build the block but I have since gone another way. I have the block and caps only. I also have a 400 block out of my 73 charger that have never been bored.I want to know just what I can get for these blocks when I try to...

I have a 73 charger that I believe need lower control arm bushens, How hard is it to do? I say this because I see the rubber around the out side of them broken.I have replaced every thing under the car but the lower control arm bushens, plus there is a popping sound under the car when leaving...

I have a 73 charger that have new body mounts,new balljoints, new trans mount and new spring bushens front and rear, the car makes a popping noise any time it is on unlevel roads or coming out of my tilted driveway. I have checked all bushen bolts and they are all tight.I have checked every...