Search results for query: *

Hi All, I'm wondering if anyone knows where to get some good quality gaskets for the key locks on the exterior for the doors and trunk? The ones I have from YearOne or Classic Industries (?) are slightly too big and don't fit well at all. The driver's door one actually fell out. The color of...

One final question for anyone that have some answers here. The attached heat shield is for the drivers side and wanting to make sure it's a natural finish as shown or is it painted with some heat resistant paint? Any help here would be great. Thanks, Wayne

Another question I'm having trouble finding info on? The attached picture is for a 1970 Superbird and I'm trying to figure out what fills this opening? I'm thinking it's one of the rubberized flaps used inside the fender wells with the stainless steel spring clips but would like to be sure...

Hi Everyone, This is for a 1970 Superbird so needs the extra nipple for the vacuum headlights. I'm hoping you'll be able to help me here once again. I'm looking in the David Wise restoration book and not finding complete info on the vacuum connector for the brake booster. I'm just doing...

Hi All, Needing some specific help on applying the large two piece nose decal on the nose. I've been able to put on the "Plymouth" on the Qtr. Panel & Round Decal on the wing as well as the headlight door successfully. However, because of the size of it and the multiple angles of the nose...

Hi all, This forum has been awesome in helping on this project. I greatly appreciate all the help! One question that I'm hoping someone has the answer for here. I'm looking to install the shoulder belts in my car. I have the belts and everything needed but what I thought was simple has me...

Hello, Need some help here. Doing the final details on the restoration of my car and have (2) Window stops (assuming this is what they are) that I'm not sure if they go on the door window or the rear quarter window and precisely where (see attached photos)? I'm at the tail end of a 4+ year...

Hi All, Wondering if anyone knows a source for heat shields (up at the exhaust manifolds) for the 440 high performance exhaust manifolds? It's getting really hot in the engine compartment, melting some plastic clips on the fender wells, this is running at 180 degrees. Especially on the...

Hi everyone, OK, here's one that has me baffled. I have a 1970 Roadrunner and finishing off a restoration on the car. It's an original power steering car but was drag raced briefly back in the day and was switched to manual steering. I am now switching it back to a power steering car. I...

Hi everyone, Wondering if anyone knows a source for video on how to install and assemble the windows and wind wing in the doors. I'm sure I can figure it out, but would save a lot of time to have some guidance. If no video some good instructions would be the next best thing. Appreciate any...

Hi Does anyone know a source for this? I'm not seeing anything at Year One and Classic Industries nothing definitive. Any help here is appreciated. Thanks, Wayne

Hi All, Just at the tail end of my restoration of my car and was wondering if someone could help me out here. I'm switching to the orange box electronic ignition and have the complete wiring harness (engine, headlights, dash & rear) from M & H. Although the car came with a 2 prong ballast...

Hello, Wondering if anyone knows where to buy the brake swivel by itself that hooks the power brake booster/Master Cylinder to the brake pedal? They have it at Classic Industries but you have to buy the plate that mounts on the firewall as well, which I don't need and makes it much more...

Hi All, Looking for the spring that goes around the outside the rear brake drum. It's a non-finned smooth exterior brake drum. It goes completely around outside of the drum. I have one of the two and wondering where to get another one or both if they are reasonable? Any help would be much...

Hi, I'm getting close to finishing my restoration project and needing new bearings (if available) for the Brake and clutch pedal. It is what the pedals pivot on when put on the rod up under the dash. They are not available from Classic or Year One. Any help is greatly appreciated . See...

Hello, I'm restoring my steering wheel on my 1970 Roadrunner and have no problem with repairing the minor cracks and getting it ready for paint. My question is how to re-create the textured finish on the steering wheel. Its the black hard plastic type, (no fake wood). I found one product...

I'm looking for some help with deciding which holes need to be welded up because they are not factory and which ones stay. I have it pretty well figured out on the firewall (although posting picture if anyone can help finalize this as well). But mainly looking for help on the Drivers and...

I'm finally restoring my Superbird (sitting since 1983) and am in need of the thin headed bolts that fasten the headlight buckets to the nose (the ones you can see when the headlights are open). I've tried RT Specialties and a couple of other similar places but not having any luck. Does anyone...

I have manual steering in my 1970 Roadrunner- It's a original power steering car (per broadcast sheet). I have the power steering box and power steering pump. Just wondering if anyone knows if the steering column needs to be shorter or is it interchangable? Thank you, Wayne

Is there a forum or place anyone knows of on the web to search for the correct VIn # Mopar engine and transmission for cars. I'm trying to find the original 440 Six pak engine for my car. Besides the lost and found forum on this site. Any help in where to look is appreciated. Thanks...