Search results for query: *

Is anyone running twin Holley 4235 and 4236 770cfm secondary carbs on their 426? If so do you care to share your jetting please Stock crate motor with the marine manifold

Is there anything regarding the front doors that are interchangeable

It seems someone has put the release lever on the wrong side of the drivers seat when they refurbished them. I've removed the circlip but it doesn't want to come off the shaft. It makes me think the end of the shaft has been mushroomed. Has anyone else come across this?

Car is a 68 Coronet. All the diagrams i've seen look different to mine. The glass is too far forward by 1/4in. Going by my photo what is the procedure?

Hi I'm having no luck finding the resistance of these 8mm silicone wires online. I relaced the plugs with BPR5ES but there seems to be a slight misfire at low revs. The misfire was more pronounced with the original RN14YC plugs. Anyway i'd like to test the wire resistance but i don't have a...

Hi there, i'm looking for opinions about a 68 Superbee clone i recently bought. It has front discs with FMJ calipers and drums at the rear with 7/8in wheel cylinders. The manual m/cyl was 1 1/8 which gave a hard pedal and the braking was pretty woeful. I've replaced the manual m/cyl with a 1in...

Does anyone have the part # so i can look for one down under. Shipping overseas is ridiculous

Does anyone know with caps?

I've got a RR with a 440 stroker that was purchased from a deceased estate without paperwork for the engine build. I've had a few 440s and this is definitely stroked. Is there a way to determine the displacement with the engine in the car through the spark plug.

I have some deep gouges on one seat back. Has anyone been able to repair these and also retain the texture?

Non Rallye no ac shipping to TX77954

Has anyone used these with the nylon spacers?

Single carb dual plane

Single carb, dual plane

Shipping to Tx77954

Good condition. Shipping to Tx77954

Wanting one for parts, shipping to Tx77954

A friend sent me a pic of the cracked trim in his 68 RR. The other pillars trim is also cracked in the same place. Is this common and what would be the best process to fix it?

My heat riser is leaking from the pin that holds the flapper. If i remove the whole heat riser assembly and plug the holes for the pin and keep the heat tubes attached, would this be ok?

Were the reservoirs for 66 one year only and is what they call yellow correct for 66? Mine on my Sat has disintergrated and appears yellowish. It's a survivor hemi 4sp so would like to keep it that way so would prefer a nice used one