Search results for query: *

I have a sure grip there is a number stamped in it 23591X it's only 10 bolt for ring gear, 8 3/4 is 12 bolts any one have any idea what this would be for. I do realize the second number is manufactured date

Hi have a 440 its on the Dyno, and we think we have a issue with the distributor and its a plug and play unit, i want to change to see if it makes any difference but the only spare i have is a Chrysler electronic one so i have to use the box with it as well, but do i have to use the ballast...

i have a max wedge, wondering what to use to lift motor into car with crossram on it im putting in from the top thanks

Has any one used the new molded big block windage tray, it says is reusable and do not require gaskets, its the Mancini Part# 20998 looks really good has any one had and experience using them does it require silicone on corners anywhere Thanks, Charlie

Can anyone tell me what year these valve covers are. Thanks

I have a 8 3/4 center section it does not have any numbers on case. the gear is a 3:91 non sure grip came out of a 64 pick up, would it be the same as a 742 case?

I have 1965 belvedere with a 383 car does not run hot but mech temp gauge does not move when car is first started and warmed up. I can be driving car and temp gauge will all of sudden pop up to 180 Degrees.could be 20 Minutes or 1 hr.. car has a cross flow aluminum rad, aluminum water pump and...

Does anyone know what the difference is between a max wedge intake and the crossram for the 440 heads.. I know the ports are different in size... Will the max wedge crossram work with 440 heads Thanks

I have a 65 belvedere wgn just finishing, started up not charging hooked the 2nd field wire to grd only charged 12.3v changed regulator & 3rd alternator and battery still only charges at idle 12.3 goes down to 12.1 when I pull the headlites on. the gauge on dash discharge with lites on until I...

I put a new trans pan gasket felpro in 727 and it leaks and it leaked with old gasket, its a aluminum deep pan I checked rails and they are straight does any one use any type of sealer on gasket?

driving veh for about 30 minute on the highway at 55mph trans started to smoke, pulled over and transmission pan gasket blew out and all oil leaked out. seams like there was a lot of pressure in trans does anybody have any idea what could cause this, gasket was changed about 2 weeks ago it...

can any one tell me what stock oil pan will fit a 65 belvedere big block, cross member is not cut & I really don't want to use A/M

need some help, I want to use mopar cast cyl heads for a 440 I have cross ram for either cyl heads. My questions is witch head is better, the max wedge head or the 906 or other casting # iam not using aluiminum heads.. Thanks

looking for a bench seat 60/40 split & brackets 62 to 65.

Have been reading site for awhile now good info. i have a 1965 plymouth belvedere wagon 440 max wedge not done yet, hopefully this summer need to finish interior that is one questions does any one no gary balls phone number have beend searching web can not find or anyone else that does the...